Lancaster · Dallas County
All-O-Matic Gate Repair in Lancaster, TX
All-O-Matic gate opener repair in Lancaster for the heavy, simple slide operators on commercial yards and site entrances, with chains, clutches and limits serviced on site.
- Licensed & Insured
- 16+ Years Experience
- Open 24/7
- Residential & Commercial
What we see on All-O-Matic gates in Lancaster
All-O-Matic operators are built to be simple and heavy, which suits commercial slide gates on Lancaster’s logistics and industrial sites. An SL-150 on a busy yard entrance runs many cycles through each shift, so its wear shows up in chain stretch, sprocket wear and clutch slip. When the reversing sensitivity is not set for the weight of a long gate, it may stop and reverse for no clear reason. Board relays also wear out on a high-cycle entrance, and the gate stops responding until the relay is replaced.
On an All-O-Matic, the fix is almost always one component. Chains and sprockets are replaced, the clutch is set to suit the gate, the limits are reset and a worn relay is swapped. Common parts are kept in stock. On a long cantilever gate at a distribution site, the SL-175DC PRO adds DC drive and battery backup if the old AC unit is worn out. For yards near I-20 and I-35E, scheduling servicing around cycle counts keeps the chain and clutch from failing during a shift change.
Real jobs nearby
Our nearest documented jobs to Lancaster
Gate operator work our technicians have documented in nearby cities, each shown under the city it was in.
LiftMasterDallas, TXresidentialA Refurbished Opener Fitted as a Cost Saving. It Was Not Right for the Gate.
A new homeowner called on a Sunday. The previous owner’s contractor had fitted a refurbished unit that was never suited to the gate it was moving.
Read the case study
EagleMesquite, TXresidentialThe Opener Was Fine. The Wheels Had Completely Failed.
A three-year-old Eagle operator was working perfectly. The sliding gate wheels underneath it were broken, which is a different repair entirely.
Read the case study
LiftMasterUniversity Park, TXresidentialA Gate Left Unused for a Year, a Broken Bracket and a Broken Arm
The customer had not operated the gate in about twelve months and wanted it working again. The bracket and the operator arm had both failed.
Read the case study
On video
Gate repairs near Lancaster on video
Filmed on our own jobs nearby, each marked with its city: Dallas (13 mi), Mesquite (15 mi), University Park (18 mi).
What usually fails on All-O-Matic operators
- Limit nut or cam slip and travel drift
- Clutch or torque-limiter slip causing stalls (SL-150, SW-300, SW-350)
- Electronic reversing device sensitivity set wrong for the gate
- Chain stretch and sprocket wear
- Control board relay failure
All-O-Matic models we repair in Lancaster
- All-O-Matic SL-100 repair
- All-O-Matic SL-150 repair
- All-O-Matic SW-300 repair
- All-O-Matic SW-350 repair
Areas we cover in Lancaster
- Rolling Meadows
- Wintergreen
- Wellington Park North
- Pleasant Run Estates
More of our All-O-Matic work
Recent All-O-Matic work by our technicians across Dallas–Fort Worth.
Customer testimonials
What our customers say
Customers across Dallas–Fort Worth, filmed at their own gates, All-O-Matic owners and Lancaster customers first. We bring the same team to Lancaster.
All-O-Matic gate repair in Lancaster: questions
Our All-O-Matic slide gate in Lancaster stops and reverses for no reason. Why?
Most often the clutch or torque limiter is slipping, or the reversing sensitivity is set too fine for the gate. A worn roller or a gate starting to bind can also trigger it. We check the gate moves freely, then set the clutch and sensitivity to match. It is rarely a sign that the operator itself has failed.
Are All-O-Matic parts easy to get for a commercial gate in Lancaster?
For the common models, yes. Chains, sprockets, limit hardware, clutch parts and boards for the SL-100, SL-150 and the DC PRO range are available, so most repairs can be completed without long delays. If an older model needs a part that is hard to source, we will tell you before starting the job.
Every gate service in Lancaster
Not a All-O-Matic? We repair every major operator brand in Lancaster, plus sliding, swing, commercial and access control work.
- Gate repair in Lancaster
- DoorKing gate repair in Lancaster
- HySecurity gate repair in Lancaster
- LiftMaster gate repair in Lancaster
All-O-Matic gate repair near Lancaster
Gate Not Working Right Now?
We answer the phone 24/7. If you are stuck, call and we will talk you through the manual release before anyone arrives. See what counts as a gate emergency.