
Tarrant County
Automatic Gate Repair in Arlington, TX
A lot of Arlington gate work involves ironwork that has been in place for decades — particularly around Interlochen and the older North Arlington neighborhoods. The recurring failure there is not electrical at all: hinges wear, the gate starts to sag, and the operator spends every cycle fighting a gate that no longer swings freely.
- Licensed & Insured
- 16+ Years Experience
- Open 24/7
- Residential & Commercial
Real jobs nearby
Recent gate repairs near Arlington
Documented call-outs within 16 miles of Arlington, each marked with the city it was done in: Fort Worth (13 mi), Southlake (14 mi), Coppell (16 mi). The same team and parts stock cover Arlington.
Video
US AutomaticFort Worth, TXresidentialAnother Company Said Replace It. We Refurbished It Instead.
A Fort Worth homeowner had been told the solar operator needed replacing. The board was corroded, the arm needed repair and the gate was leaning — all fixable.
Read the case study Video
Southlake, TXresidentialThe Control Box Had Been Left Open. Debris and Corrosion Did the Rest.
An open enclosure let debris collect around the electronics and moisture reach the board. The board and the backup batteries were replaced; the opener stayed.
Read the case study Video
EagleCoppell, TXresidentialThe Operator Was 26 Years Old. It Is Still Working.
An Eagle 2000 that is no longer manufactured, on a gate with worn wheels and a stretched chain. Replacing the worn parts cost a fraction of replacing the unit.
Read the case study
Gate repair in Arlington
A lot of Arlington gate work involves ironwork that has been in place for decades — particularly around Interlochen and the older North Arlington neighborhoods. The recurring failure there is not electrical at all: hinges wear, the gate starts to sag, and the operator spends every cycle fighting a gate that no longer swings freely.
By the time someone calls, the operator has usually been blamed for months. Re-hanging the gate and addressing the post is the actual repair, and it is considerably cheaper than the new operator that gets quoted for the symptom.
Arlington also has a large events and hospitality footprint around the stadium district, and the commercial gates and barrier arms serving those lots take an enormous number of cycles in short bursts. A parking barrier that sits idle most of the week and then runs continuously for two days behaves nothing like a residential gate, and it needs servicing on that rhythm rather than on a calendar.
What we see most in Arlington
Established residential neighborhoods with older iron gates plus commercial and event-adjacent controlled access.
Common gate types
- Wrought iron swing
- Slide gate
- Commercial barrier arm
Operators we service here
Areas we cover in Arlington
- Viridian
- Interlochen
- North Arlington
- Southwest Arlington
- Country Club Estates
Zip codes served
- 76001
- 76006
- 76010
- 76012
- 76013
- 76016
- 76017
- 76018
Getting to you
We usually run in via I-20, I-30, SH-360, Cooper Street.
We run 24 hours a day, seven days a week. You get a real arrival window when you call, and a message when the technician is on the way.
Local landmarks near our Arlington calls: AT&T Stadium · Globe Life Field · Six Flags Over Texas · River Legacy Park
Gate repair services in Arlington
We are an automatic gate repair company with technicians working across Arlington and Tarrant County: electric and driveway gate repair, sliding and swing gates, gate opener and gate motor repair, emergency call-outs, and commercial gate repair for HOA and business entrances. The gate repair technician who diagnoses the fault carries the parts to fix most of them on the first visit.
- Gate Opener & Motor RepairOpeners that hum, click, stall or will not respond
- Emergency Gate RepairGate stuck open or shut — day or night
- Automatic Gate RepairAutomatic and driveway gates that will not open or close
- Sliding Gate RepairWheels, track, chain and gates off their track
- Swing Gate RepairSagging gates, arms, hinges and double gates
- Electric Gate RepairPower faults, wiring, solar and battery systems
- Iron Gate Repair & WeldingWelding, hinges, posts and damaged iron gates
- Commercial & HOA Gate RepairApartments, HOA entrances and industrial gates
- Access Control & Intercom RepairKeypads, call boxes, card readers and intercoms
- Gate InstallationNew automatic gates and opener installation
Gate installation and replacement in Arlington
We also install and replace gates and operators in Arlington: sliding gate installation, swing gate installation, gate opener and gate operator installation on an existing gate, gate motor replacement, gate opener replacement and full automatic gate replacement. The gates we work on most in Arlington are wrought iron swing, slide gate, and commercial barrier arm, and each is specified differently: weight, length, slope and how often it runs decide the operator.
Before quoting a replacement we check whether a repair will do, because a failed board, capacitor or limit switch is far cheaper than a new motor.
Operator brands and models we repair in Arlington
Every brand links to what we repair on it, and to the individual models we are called out to most across Tarrant County.
- All-O-Matic gate repair in Arlington →
- LiftMaster gate repair in Arlington →
- Elite gate repair in Arlington →
- Eagle gate repair in Arlington →
Common gate problems we fix in Arlington
Find your gate’s symptom for the likely causes, what you can safely check yourself, and when it needs a technician.
- Automatic gate not working at all
- Gate won’t open
- Gate won’t close
- Gate stops halfway
- Gate reverses when closing
- Gate opens by itself
- Photo eye / safety sensor not working
- Loop detector not working
- Gate opener has no power
- Gate not working after a storm
- Gate battery keeps dying
- Gate circuit board not working
- Gate motor not working
- Gate not working after a power outage
- Gate remote not working
- Gate keypad not working
- Sliding gate off track
- Gate roller or wheel broken
- Gate chain broken
- Gate sagging or dragging
- Gate post leaning
- Swing gate stuck
- Sliding gate stuck
- Gate track damaged
- Gate hinge broken
We cover Arlington and the rest of Tarrant County
Arlington is one of 26 Tarrant County cities we service. Our technicians work across the whole Dallas–Fort Worth Metroplex, so a call from Arlington goes to the same team, with the same parts on the truck, as a call from Dallas.
Also serving nearby
Customer testimonials
Real Customers. Real Repairs. Watch Our Customers Tell Their Stories.
Customers across Dallas–Fort Worth, filmed at their own gates. We bring the same team and the same parts stock to Arlington.
On video
Gate repairs near Arlington on video
Filmed on our own jobs nearby, each marked with its city: Fort Worth (13 mi), Southlake (14 mi), Coppell (16 mi).
Our technicians, on our own jobs
Every photograph on this site is our own work. None of it is stock, and none of it is generated.
Operators we repair
Gate Operator Brands We Repair
We repair the operators other companies would rather replace. Swapping the whole operator is easier than diagnosing it, so that is often what gets quoted. We repair control boards, limit switches, hydraulic pumps and gearboxes on all of these — and every tile below is a photograph of that manufacturer’s equipment, not a logo.
Factory-level repairFAAC
7 photos + video
Factory-level repairAll-O-Matic
21 photos + video
Factory-level repairRamset
12 photos + video

LiftMaster
35 photos + video

Elite
9 photos + video

Viking
8 photos + video

Eagle
7 photos + video
Factory-level repairDoorKing
5 photos + video
Factory-level repairUS Automatic
5 photos
We also service:
- Linear
- HySecurity
- Apollo
- Mighty Mule
- Ghost Controls
- Nice
- BFT
- GTO
- Apollo · Chamberlain · and others
Real work
Watch Us Actually Do the Work
Not stock footage. Not a slideshow. Real Shield technicians repairing real gates across Dallas–Fort Worth — LiftMaster board swaps, FAAC hydraulic work, Ramset operator replacements, emergency call-outs.
Every other gate company in this market shows you a stock photo of a gate. We’ll show you the repair.
Arlington gate repair questions
My iron gate is dragging on the driveway. Is the gate bent?
More often the hinges have worn or the post has moved. Dallas–Fort Worth clay shifts posts seasonally, and decades-old hinges develop play. Straightening or forcing the gate without fixing the post or hinge means it will be dragging again within a season.
Do you cover all of Arlington?
Yes, across all of Arlington and neighbouring Tarrant County cities. We give you a real arrival window when you call, based on where the nearest truck actually is and the traffic on I-20 and SH-360.
We also serve these nearby cities
Gate Not Working Right Now?
We answer the phone 24/7. If you are stuck, call and we will talk you through the manual release before anyone arrives. See what counts as a gate emergency.









