Automatic Gate Repair Fort Worth, TX

Real jobs

Gate repairs we have completed in Fort Worth

Photographs and write-ups from actual Fort Worth call-outs — what failed, what we found and what it took to put right.

Video
US AutomaticFort Worth, TXresidential
Another Company Said Replace It. We Refurbished It Instead.
A Fort Worth homeowner had been told the solar operator needed replacing. The board was corroded, the arm needed repair and the gate was leaning — all fixable.
Read the case study

Real jobs nearby

Recent gate repairs near Fort Worth

Documented call-outs within 23 miles of Fort Worth, each marked with the city it was done in: Southlake (17 mi), Coppell (23 mi). The same team and parts stock cover Fort Worth.

All case studies

Gate repair in Fort Worth

Fort Worth splits three ways for gate work. West of downtown — Arlington Heights, Ridglea Hills, Westcliff and Wedgwood — the housing is largely post-war, and a good share of the operators on those driveways are twenty years old or more, which makes a control board or a limit adjustment the likely repair rather than a new unit.

Push out past Loop 820 into the 76126 and 76179 zip codes and the lots turn into acreage: those gates usually run from a battery kept topped up by a solar panel, so a gate that has slowed down is a charging question before it is an operator question. North toward Alliance the work is commercial — yard entrances, distribution gates and apartment entrances cycling hundreds of times a day, where a chain wears out in a season rather than a decade.

Those are three different diagnoses, and we do not approach them the same way.

What we see most in Fort Worth

Three separate kinds of gate work inside one city — post-war driveways on the west side, acreage entrances beyond Loop 820, and high-cycle commercial gates on the north side.

Common gate types

Wrought iron swing
Ranch and acreage swing
Commercial slide
Apartment entrance slide

Operators we service here

What usually fails

Areas we cover in Fort Worth

Arlington Heights
Ridglea Hills
Wedgwood
Westcliff
Overton Park
Fairmount
Mistletoe Heights
Near Southside

Zip codes served

76107
76108
76109
76116
76126
76132
76133
76131
76137
76177
76179

Getting to you

We usually run in via I-35W, Loop 820, Chisholm Trail Parkway, US-377 / Camp Bowie.

We run 24 hours a day, seven days a week. You get a real arrival window when you call, and a message when the technician is on the way.

Local landmarks near our Fort Worth calls: Fort Worth Stockyards · Fort Worth Water Gardens · Fort Worth Botanic Garden · Will Rogers Memorial Center · Dickies Arena

Gate repair services in Fort Worth

We are an automatic gate repair company with technicians working across Fort Worth and Tarrant County: electric and driveway gate repair, sliding and swing gates, gate opener and gate motor repair, emergency call-outs, and commercial gate repair for HOA and business entrances. The gate repair technician who diagnoses the fault carries the parts to fix most of them on the first visit.

Gate installation and replacement in Fort Worth

We also install and replace gates and operators in Fort Worth: sliding gate installation, swing gate installation, gate opener and gate operator installation on an existing gate, gate motor replacement, gate opener replacement and full automatic gate replacement. The gates we work on most in Fort Worth are wrought iron swing, ranch and acreage swing, commercial slide, and apartment entrance slide, and each is specified differently: weight, length, slope and how often it runs decide the operator.

Before quoting a replacement we check whether a repair will do, because a failed board, capacitor or limit switch is far cheaper than a new motor. The Fort Worth job above shows what that looks like in practice.

Automatic gate installation and replacement

Operator brands and models we repair in Fort Worth

Brands marked “our job here” are ones we have a documented Fort Worth repair for — see the case studies above. Every brand links to what we repair on it, and to the individual models we are called out to most.

Common gate problems we fix in Fort Worth

Find your gate’s symptom for the likely causes, what you can safely check yourself, and when it needs a technician.

Coverage schematic — shows which nearby cities we serve, not exact distances or boundaries.

We cover Fort Worth and the rest of Tarrant County

Fort Worth is one of 26 Tarrant County cities we service. Our technicians work across the whole Dallas–Fort Worth Metroplex, so a call from Fort Worth goes to the same team, with the same parts on the truck, as a call from Dallas.

Also serving nearby

Customer testimonials

Real Customers. Real Repairs. Watch Our Customers Tell Their Stories.

Customers across Dallas–Fort Worth, filmed at their own gates. We bring the same team and the same parts stock to Fort Worth.

Watch every customer video

On video

Gate repairs in Fort Worth on video

Filmed on site in Fort Worth — the fault, the parts replaced and the gate working again.

Watch the Fort Worth refurbishment — watch on YouTube (opens in a new tab)
US AutomaticFort Worth
Watch the Fort Worth refurbishment
Read the case study

Our technicians, on our own jobs

Every photograph on this site is our own work. None of it is stock, and none of it is generated.

Operators we repair

Gate Operator Brands We Repair

We repair the operators other companies would rather replace. Swapping the whole operator is easier than diagnosing it, so that is often what gets quoted. We repair control boards, limit switches, hydraulic pumps and gearboxes on all of these — and every tile below is a photograph of that manufacturer’s equipment, not a logo.

We also service:

Linear
HySecurity
Apollo
Mighty Mule
Ghost Controls
Nice
BFT
GTO
Apollo · Chamberlain · and others

Real work

Watch Us Actually Do the Work

Not stock footage. Not a slideshow. Real Shield technicians repairing real gates across Dallas–Fort Worth — LiftMaster board swaps, FAAC hydraulic work, Ramset operator replacements, emergency call-outs.

Every other gate company in this market shows you a stock photo of a gate. We’ll show you the repair.

FAAC Gate Operator Repair — Hydraulic ServiceVideo page

All-O-Matic Slide Operator — Drive and Clutch ServiceVideo page

Ramset Slide Gate — Worn Rollers Destroying the DriveVideo page

Moisture-Corroded LiftMaster Board and an Undersized Solar ArrayVideo page

A Same-Day Emergency Gate Call-Out (Video)Video page

Welding a Cracked Iron Gate Frame (Video)Video page

Watch all repair videos

Fort Worth gate repair questions

My gate lined up fine last year and now it catches. Nothing was touched.

The post moved, not the gate. A geotechnical report the city publishes for a north Fort Worth site estimates the local clay can rise and fall by roughly three to eight and a half inches as its moisture changes, and a gate post set in that ground goes with it. Re-hanging the gate and correcting the post is considerably cheaper than the operator replacement the resulting strain often gets blamed on.

Hail came through and the gate stopped responding. Is the operator finished?

Usually not. Fort Worth gets genuinely severe hail — the 1995 Mayfest storm put softball-sized stones across the city — and what it damages is the exposed hardware: photo-eyes, an antenna, a solar panel, or the board inside an enclosure that has been cracked or let water in. Every one of those is an individual part, and we quote them individually.

Do you cover the acreage properties west of Loop 820?

Yes, and they are a distinct kind of call. Out there the gate is typically a long single leaf on a battery-and-solar operator at the end of a driveway, where a failure locks in a whole property rather than one car. We test the battery under load and the panel output before touching the operator, because that is where the fault usually is.

We also serve these nearby cities

See all 200+ cities we serve →

Automatic Gate Repair in Fort Worth, TX