Rockwall · Rockwall County
All-O-Matic Gate Repair in Rockwall, TX
In Rockwall, All-O-Matic operators run heavy swing and slide gates in damp lakeside air. They are simple machines, so a stall or a drift is nearly always one part we can change on site.
- Licensed & Insured
- 16+ Years Experience
- Open 24/7
- Residential & Commercial
What we see on All-O-Matic gates in Rockwall
An All-O-Matic copes well with weight, which suits the ornamental iron gates around The Shores and Chandlers Landing. What wears it down is the pairing of a heavy leaf and moist air. Hinges seize slowly, the gate gets harder to move, and the operator’s protection starts to act: the SW-350’s torque limiter slips on a swing gate, and on an SL-150 slide the gearbox clutch lets go. Meanwhile chains rust faster near the water, stretch, and start riding high on the sprocket. None of that means the operator has failed.
We fix the cause. That means freeing or replacing hinges, swapping a rusted chain before it chews the sprocket teeth, and resetting limits that have crept over thousands of cycles. On the slide models the limits are nuts held by a lock plate; on older swing units they are cams with an Allen screw, and both adjust in place. Control board relays are the other usual failure, normally a short order at most. For a community slide gate off John King Boulevard, that work typically costs a fraction of a new operator.
Real jobs nearby
Our nearest documented jobs to Rockwall
Gate operator work our technicians have documented in nearby cities, each shown under the city it was in.
EagleMesquite, TXresidentialThe Opener Was Fine. The Wheels Had Completely Failed.
A three-year-old Eagle operator was working perfectly. The sliding gate wheels underneath it were broken, which is a different repair entirely.
Read the case study
LiftMasterRichardson, TXresidentialThe Board Had Physically Fallen Inside the Operator
A Sunday call from a senior customer. The circuit board had come loose and failed, and because it had stopped charging them, both backup batteries had gone too.
Read the case study
LiftMasterUniversity Park, TXresidentialA Gate Left Unused for a Year, a Broken Bracket and a Broken Arm
The customer had not operated the gate in about twelve months and wanted it working again. The bracket and the operator arm had both failed.
Read the case study
On video
Gate repairs near Rockwall on video
Filmed on our own jobs nearby, each marked with its city: Mesquite (14 mi), Richardson (16 mi), University Park (20 mi).
What usually fails on All-O-Matic operators
- Limit nut or cam slip and travel drift
- Clutch or torque-limiter slip causing stalls (SL-150, SW-300, SW-350)
- Electronic reversing device sensitivity set wrong for the gate
- Chain stretch and sprocket wear
- Control board relay failure
All-O-Matic models we repair in Rockwall
- All-O-Matic SL-100 repair
- All-O-Matic SL-150 repair
- All-O-Matic SW-300 repair
- All-O-Matic SW-350 repair
Areas we cover in Rockwall
- Chandlers Landing
- The Shores
- Stone Creek
- Breezy Hill
- Lakeside Village
More of our All-O-Matic work
Recent All-O-Matic work by our technicians across Dallas–Fort Worth.
Customer testimonials
What our customers say
Customers across Dallas–Fort Worth, filmed at their own gates, All-O-Matic owners and Rockwall customers first. We bring the same team to Rockwall.
All-O-Matic gate repair in Rockwall: questions
Why does the chain on our Rockwall All-O-Matic rust so quickly?
Lake humidity keeps the chain damp for long stretches, and a chain that is not cleaned and lubricated rusts and stretches faster than one inland. A stretched chain rides higher on the sprocket and wears the teeth until it jumps. Replacing the chain early is cheap. Waiting until it takes the sprocket and the gearbox with it is not, so we check it on every visit.
Can you service the All-O-Matic on our gated community entrance?
Yes. Community slide gates run many more cycles than a driveway, so chains, limit hardware and board relays wear sooner, but they are all standard parts. We service the operator, set the reversing device sensitivity to suit the gate, and test the photo-eyes and loops that feed it. A regular service interval works well near the lake, where corrosion is predictable and early work is cheaper.
Every gate service in Rockwall
Not a All-O-Matic? We repair every major operator brand in Rockwall, plus sliding, swing, commercial and access control work.
- Gate repair in Rockwall
- LiftMaster gate repair in Rockwall
- Elite gate repair in Rockwall
- Viking gate repair in Rockwall
All-O-Matic gate repair near Rockwall
Gate Not Working Right Now?
We answer the phone 24/7. If you are stuck, call and we will talk you through the manual release before anyone arrives. See what counts as a gate emergency.