Skip to content
Shield Gate Repair

Sunnyvale · Dallas County

All-O-Matic Gate Repair in Sunnyvale, TX

All-O-Matic gate repair in Sunnyvale means a heavily built operator on a wide estate or ranch gate. The fix is usually a clutch, limit or relay, with the long power run checked too.

  • Licensed & Insured
  • 16+ Years Experience
  • Open 24/7
  • Residential & Commercial

What we see on All-O-Matic gates in Sunnyvale

Estate driveway swings, ranch entrances and driveway slides in Sunnyvale tend to be wider and heavier than their suburban counterparts, and All-O-Matic operators are often chosen for that kind of gate. Their simple, heavy build lasts, but the strain of a large gate shows at the clutch or torque limiter, which slips and stalls the gate, and at the limit cams, which drift so the gate stops short. On slide models, chain stretch and sprocket wear are routine. A reversing device set too sensitive for a heavy leaf causes false reversals, and a long feed from the house can deliver low voltage that makes everything harder.

We check the gate moves freely, then adjust or replace the clutch, reset limits and replace worn chains or relays. On the SW-350 and SL-150, the internal gearbox clutch is the usual adjustment point. Voltage at the operator is measured on long runs. For gates where power is a problem, a DC model such as the SL-90DC PRO may be worth considering. We cover Homestead, Stoney Creek and beyond.

On video

Gate repairs near Sunnyvale on video

Filmed on our own jobs nearby, each marked with its city: Mesquite (3 mi), Dallas (14 mi), University Park (14 mi).

What usually fails on All-O-Matic operators

  • Limit nut or cam slip and travel drift
  • Clutch or torque-limiter slip causing stalls (SL-150, SW-300, SW-350)
  • Electronic reversing device sensitivity set wrong for the gate
  • Chain stretch and sprocket wear
  • Control board relay failure

All-O-Matic gate repair across Dallas–Fort Worth →

All-O-Matic models we repair in Sunnyvale

Areas we cover in Sunnyvale

  • Homestead
  • Stoney Creek
  • Fox Hollow

More of our All-O-Matic work

Recent All-O-Matic work by our technicians across Dallas–Fort Worth.

  • An All-O-Matic sliding gate operator on a raised steel pad, driving a cedar-panel sliding gate
  • An All-O-Matic slide gate operator against a dark painted board fence, with the drive chain running along the gate
  • An All-O-Matic operator on a steel stand with its drive chain attached to a wooden sliding gate

Customer testimonials

What our customers say

Customers across Dallas–Fort Worth, filmed at their own gates, All-O-Matic owners and Sunnyvale customers first. We bring the same team to Sunnyvale.

All-O-Matic gate repair in Sunnyvale: questions

Why does my All-O-Matic in Sunnyvale stop short of fully open?

That is usually a limit cam or nut that has slipped, or a clutch slipping under the weight of a wide gate. On large Sunnyvale gates, hinge wear can add enough drag to trigger the clutch. We check the gate mechanically, reset the limits and adjust the clutch so it opens fully.

Are All-O-Matic parts available for older Sunnyvale gates?

For most common repairs, yes. Limit parts, clutch components, chains, sprockets and relays cover most All-O-Matic faults. If an older model needs a part that must be ordered, we explain the timing and make the gate usable in the meantime where possible.

Every gate service in Sunnyvale

Not a All-O-Matic? We repair every major operator brand in Sunnyvale, plus sliding, swing, commercial and access control work.

All-O-Matic gate repair near Sunnyvale

    Gate Not Working Right Now?

    We answer the phone 24/7. If you are stuck, call and we will talk you through the manual release before anyone arrives. See what counts as a gate emergency.

    Call NowText UsEstimate