Midlothian · Ellis County
All-O-Matic Gate Repair in Midlothian, TX
All-O-Matic operators handle Midlothian’s heavy ranch and commercial gates well, but cement dust and vibration still wear them. The repair is usually a chain, a limit or a clutch adjustment.
- Licensed & Insured
- 16+ Years Experience
- Open 24/7
- Residential & Commercial
What we see on All-O-Matic gates in Midlothian
Dust in Midlothian is abrasive, and on an All-O-Matic it goes straight for the drive. On an SL-150 or SL-100 slide it mixes with the chain lubricant into a grinding paste, so the chain stretches and the sprocket wears faster than usual. It packs into slide tracks and rollers too, adding drag that makes the clutch or reversing device stop the gate. On ranch entrance swings, blasting vibration slowly loosens hinge and post fixings, the leaf sags, and the SW-300 torque limiter slips. Each of those faults sits outside the motor.
We clean the chain, track and rollers, then replace a chain before it ruins the sprocket. Hinge bolts and post brackets get tightened, and limits are reset if the gate has shifted. Control board relays are the main electrical failure and a short order at most. On a commercial slide near Hillstone Estates or Somercrest, the cleaner the drive stays, the longer it lasts, so we recommend more frequent service than a dust-free town would need.
Real jobs nearby
Our nearest documented jobs to Midlothian
Gate operator work our technicians have documented in nearby cities, each shown under the city it was in.
LiftMasterDallas, TXresidentialA Refurbished Opener Fitted as a Cost Saving. It Was Not Right for the Gate.
A new homeowner called on a Sunday. The previous owner’s contractor had fitted a refurbished unit that was never suited to the gate it was moving.
Read the case study
US AutomaticFort Worth, TXresidentialAnother Company Said Replace It. We Refurbished It Instead.
A Fort Worth homeowner had been told the solar operator needed replacing. The board was corroded, the arm needed repair and the gate was leaning — all fixable.
Read the case study
LiftMasterUniversity Park, TXresidentialA Gate Left Unused for a Year, a Broken Bracket and a Broken Arm
The customer had not operated the gate in about twelve months and wanted it working again. The bracket and the operator arm had both failed.
Read the case study
On video
Gate repairs near Midlothian on video
Filmed on our own jobs nearby, each marked with its city: Dallas (23 mi), Fort Worth (27 mi), University Park (28 mi).
What usually fails on All-O-Matic operators
- Limit nut or cam slip and travel drift
- Clutch or torque-limiter slip causing stalls (SL-150, SW-300, SW-350)
- Electronic reversing device sensitivity set wrong for the gate
- Chain stretch and sprocket wear
- Control board relay failure
All-O-Matic models we repair in Midlothian
- All-O-Matic SL-100 repair
- All-O-Matic SL-150 repair
- All-O-Matic SW-300 repair
- All-O-Matic SW-350 repair
Areas we cover in Midlothian
- Lawson Farms
- Dove Creek
- Somercrest
- Hillstone Estates
- Massey Meadows
More of our All-O-Matic work
Recent All-O-Matic work by our technicians across Dallas–Fort Worth.
Customer testimonials
What our customers say
Customers across Dallas–Fort Worth, filmed at their own gates, All-O-Matic owners and Midlothian customers first. We bring the same team to Midlothian.
All-O-Matic gate repair in Midlothian: questions
Why does my All-O-Matic slide gate in Midlothian grind?
Dust has usually worked into the chain and sprocket. Cement and quarry dust is fine and abrasive, and combined with lubricant it wears the chain and teeth fast. A grinding noise means the chain is stretched or the sprocket is worn. We clean the drive, replace the worn parts, and set a service interval so the new chain is cleaned before it reaches the same point.
Is an All-O-Matic a good choice for a gate opening onto US-287?
For a heavy gate on a busy road, it is a sound choice because it is built heavily and is straightforward to service. What matters more is the installation: a solid footing that vibration from haulage traffic will not loosen, and enough setback that vehicles can wait off the road. We look at both when repairing or replacing one near the highway.
Every gate service in Midlothian
Not a All-O-Matic? We repair every major operator brand in Midlothian, plus sliding, swing, commercial and access control work.
- Gate repair in Midlothian
- LiftMaster gate repair in Midlothian
- DoorKing gate repair in Midlothian
- US Automatic gate repair in Midlothian
All-O-Matic gate repair near Midlothian
- All-O-Matic in Waxahachie
- All-O-Matic in Cedar Hill
- All-O-Matic in Mansfield
- All-O-Matic in Red Oak
- All-O-Matic in Grand Prairie
Gate Not Working Right Now?
We answer the phone 24/7. If you are stuck, call and we will talk you through the manual release before anyone arrives. See what counts as a gate emergency.