Grand Prairie · Dallas County
All-O-Matic Gate Repair in Grand Prairie, TX
All-O-Matic openers in Grand Prairie run residential swing gates and commercial slide gates alike. They are plain machines, and plain machines are usually one part away from working again.
- Licensed & Insured
- 16+ Years Experience
- Open 24/7
- Residential & Commercial
What we see on All-O-Matic gates in Grand Prairie
Grand Prairie covers a lot of ground, from the residential streets of Westchester to the commercial frontage along I-30, and an All-O-Matic can turn up anywhere on that spread. On a commercial slide gate the strain is cycle count: chain stretch, sprocket wear and a reversing device that begins to trip as the gate gets heavier to drive. On a residential swing gate the usual complaint is travel that wanders, where the limit nut or cam has slipped so the gate stops early or pushes past its stop.
The checklist for this brand is short and practical. Limits get reset or replaced. The torque limiter on an SW-350 or SL-150 is adjusted so it neither slips nor overpowers the gate. Chains and sprockets are changed as a pair. Board relays are tested. On a commercial site that needs more capacity, an SL-90DC PRO or SL-175DC PRO is the step up within the same brand. Anyone recommending a whole new opener should explain why first.
Real jobs nearby
Our nearest documented jobs to Grand Prairie
Gate operator work our technicians have documented in nearby cities, each shown under the city it was in.
LiftMasterDallas, TXresidentialA Refurbished Opener Fitted as a Cost Saving. It Was Not Right for the Gate.
A new homeowner called on a Sunday. The previous owner’s contractor had fitted a refurbished unit that was never suited to the gate it was moving.
Read the case study
LiftMasterUniversity Park, TXresidentialA Gate Left Unused for a Year, a Broken Bracket and a Broken Arm
The customer had not operated the gate in about twelve months and wanted it working again. The bracket and the operator arm had both failed.
Read the case study
EagleCoppell, TXresidentialThe Operator Was 26 Years Old. It Is Still Working.
An Eagle 2000 that is no longer manufactured, on a gate with worn wheels and a stretched chain. Replacing the worn parts cost a fraction of replacing the unit.
Read the case study
On video
Gate repairs near Grand Prairie on video
Filmed on our own jobs nearby, each marked with its city: Dallas (12 mi), University Park (14 mi), Coppell (14 mi).
What usually fails on All-O-Matic operators
- Limit nut or cam slip and travel drift
- Clutch or torque-limiter slip causing stalls (SL-150, SW-300, SW-350)
- Electronic reversing device sensitivity set wrong for the gate
- Chain stretch and sprocket wear
- Control board relay failure
All-O-Matic models we repair in Grand Prairie
- All-O-Matic SL-100 repair
- All-O-Matic SL-150 repair
- All-O-Matic SW-300 repair
- All-O-Matic SW-350 repair
Areas we cover in Grand Prairie
- Mira Lagos
- Westchester
- Lake Parks
- The Peninsula
- Grand Peninsula
More of our All-O-Matic work
Recent All-O-Matic work by our technicians across Dallas–Fort Worth.
Customer testimonials
What our customers say
Customers across Dallas–Fort Worth, filmed at their own gates, All-O-Matic owners and Grand Prairie customers first. We bring the same team to Grand Prairie.
All-O-Matic gate repair in Grand Prairie: questions
My All-O-Matic swing gate in Grand Prairie stops a foot short of closing. What is wrong?
Most often the limit has drifted. On All-O-Matic swing operators the limit nut or cam can slip over time, and the gate then stops early or runs past its mark. A clutch that slips under load, perhaps because the hinges have stiffened, gives a similar result. Both are adjustments or small parts. We check the hinges and the gate first so the fix holds.
Can an All-O-Matic run a commercial gate near I-30?
Yes, if it is the right model for the gate. All-O-Matic builds commercial slide operators, and the DC PRO line such as the SL-90DC PRO and SL-175DC PRO is designed for heavier and busier gates. Matching the unit to the gate’s weight and daily cycles is what keeps chains, sprockets and the clutch from wearing early.
Every gate service in Grand Prairie
Not a All-O-Matic? We repair every major operator brand in Grand Prairie, plus sliding, swing, commercial and access control work.
- Gate repair in Grand Prairie
- LiftMaster gate repair in Grand Prairie
- HySecurity gate repair in Grand Prairie
- Ramset gate repair in Grand Prairie
All-O-Matic gate repair near Grand Prairie
Gate Not Working Right Now?
We answer the phone 24/7. If you are stuck, call and we will talk you through the manual release before anyone arrives. See what counts as a gate emergency.