Skip to content
Shield Gate Repair

Prosper · Collin County

Electric Gate Repair in Prosper, TX

Electric gate repair in Prosper for the long power and signal runs behind estate and community gates. We trace the supply, transformer, wiring, board and loops to find where the power is being lost.

  • Licensed & Insured
  • 16+ Years Experience
  • Open 24/7
  • Residential & Commercial

Electric Gate Repair in Prosper: what we see

On a Prosper estate lot, the gate is often a long way from the house, and every foot of low-voltage cable between them costs some voltage. If the cable is undersized, the operator gets too little power and runs slowly, hesitates or stops, worst in cold weather. Buried runs along the drive are also exposed to irrigation repairs, landscaping and ground movement, and an unsealed splice will corrode. At community entrances, a failed transformer or loop can take down the whole entrance.

We measure voltage at the house and at the gate under load, then test continuity along the run and check every splice. If the cable is the wrong gauge for the distance, we say so and plan a replacement run. Surge damage after storms is the other common call, and we test the board, receiver and loop detectors separately so you pay only for what failed. On properties off US-380 University Drive and in Gentle Creek Estates, surge protection is worth adding where it is missing.

On video

Gate jobs near Prosper on video

Filmed on our own jobs, each marked with its city: Frisco (6 mi), Richardson (20 mi), Coppell (23 mi).

Signs you need electric gate repair

  • No power to the gate at allBreaker, transformer, or damaged supply run
  • Intermittent operationLoose connection, corroded terminal, or a failing board
  • Works after rain, fails when dry (or vice versa)Moisture ingress or a damaged buried cable
  • Tripping the breakerShort in the operator, wiring or an accessory — stop using the gate
  • Solar gate dying after a few cyclesBattery at end of life or a charging fault, not the operator
  • Burning smell from the housingKill power immediately and call

Electric Gate Repair across Dallas–Fort Worth →

Our recent electric gate repair work

Photos from our technicians' recent jobs across Dallas–Fort Worth.

  • An old gate operator opened up with two removed circuit boards laid on the grass during a board replacement
  • An ageing sliding gate operator stripped down to its frame and control board in the corner of a wood gate
  • An operator control box opened beside a wood fence, with tools laid out on the ground
  • A swing gate operator and its open control panel during an electrical repair
  • A swing gate arm operator and its control box mounted on a brick wall
  • A gate operator removed for repair beside a wood gate, with tools and parts cases on the driveway

Customer testimonials

What our customers say

Customers across Dallas–Fort Worth, filmed at their own gates. We bring the same team to Prosper.

Areas we cover in Prosper

  • Windsong Ranch
  • Star Trail
  • Whitley Place
  • Gentle Creek Estates
  • Lakes of La Cima

Electric Gate Repair in Prosper: questions

How can I tell if my Prosper gate has a voltage drop problem?

The usual signs are a gate that runs slower than it used to, struggles more in cold weather, or works after resting but fails after several cycles. Lights on the board may dim when the motor starts. We measure voltage at the operator while it runs, which shows the problem clearly.

Does replacing a long buried gate cable mean digging up the drive?

Not always. Where the original conduit is intact, we can often pull new cable through it. Where it is not, we look for a route along the edge of the drive or through landscaping. We locate the fault and the conduit first, then explain the options before any digging.

Gate Not Working Right Now?

We answer the phone 24/7. If you are stuck, call and we will talk you through the manual release before anyone arrives. See what counts as a gate emergency.

Call NowText UsEstimate