Benbrook · Tarrant County
Elite Gate Repair in Benbrook, TX
Elite AC operators on Benbrook gates deal with slopes and runoff that flat-ground installs never see. The common faults are serviceable parts, and we repair them where the operator is sound.
- Licensed & Insured
- 16+ Years Experience
- Open 24/7
- Residential & Commercial
What we see on Elite gates in Benbrook
An Elite is an AC operator, and on Benbrook’s rolling ground that matters in two ways. First, a swing leaf on an incline loads the motor unevenly, and the start capacitor takes the strain: when it weakens, the motor hums and the gate does not move. Second, water. A drive that falls toward the gate carries rain into the track and toward the operator housing, which is hard on control boards and photo eyes. Limit switches drift faster too when a leaf is pushed and pulled by gravity on every cycle.
All three of the usual Elite failures, the board, the capacitor and the limit switches, are replaceable without removing the operator. On an older SL595 or SL585 slide unit near Winscott Road or Vega Drive, chain and sprocket wear is the other regular job, worse where grit is washed into the track. The CSW200UL and SL3000UL, now sold as LiftMaster Elite Series, follow the same repair logic. Replacement is for a worn gearbox or a unit undersized for the gate.
Real jobs nearby
Our nearest documented jobs to Benbrook
Gate operator work our technicians have documented in nearby cities, each shown under the city it was in.
US AutomaticFort Worth, TXresidentialAnother Company Said Replace It. We Refurbished It Instead.
A Fort Worth homeowner had been told the solar operator needed replacing. The board was corroded, the arm needed repair and the gate was leaning — all fixable.
Read the case study
Southlake, TXresidentialThe Control Box Had Been Left Open. Debris and Corrosion Did the Rest.
An open enclosure let debris collect around the electronics and moisture reach the board. The board and the backup batteries were replaced; the opener stayed.
Read the case study
EagleCoppell, TXresidentialThe Operator Was 26 Years Old. It Is Still Working.
An Eagle 2000 that is no longer manufactured, on a gate with worn wheels and a stretched chain. Replacing the worn parts cost a fraction of replacing the unit.
Read the case study
On video
Gate repairs near Benbrook on video
Filmed on our own jobs nearby, each marked with its city: Fort Worth (9 mi), Southlake (27 mi), Coppell (32 mi).
What usually fails on Elite operators
- Control board failure
- Capacitor failure
- Limit switch drift
- Photo-eye alignment faults
- Chain and sprocket wear on slide units
- Battery backup failure
Elite models we repair in Benbrook
Areas we cover in Benbrook
- Whitestone Ranch
- Ridglea Country Club Estates
- Timbercreek Estates
- Mira Vista
- Hencken Ranch
More of our recent gate repair work
Recent gate operator jobs by our technicians across Dallas–Fort Worth.
Customer testimonials
What our customers say
Customers across Dallas–Fort Worth, filmed at their own gates, Elite owners and Benbrook customers first. We bring the same team to Benbrook.
Elite gate repair in Benbrook: questions
My Elite gate motor in Benbrook hums but the gate does not move. What is it?
On an AC Elite operator a humming motor with no movement very often means the start capacitor has failed. It is an inexpensive part and replaceable on site. On a sloped drive the capacitor works harder than usual, which can shorten its life. We confirm it with a test, check the gate swings freely by hand, then replace the capacitor and retest the full travel.
Can you still get parts for an Elite SL595 in Benbrook?
Boards, capacitors, limit switches, chains and sprockets are the parts that fail on the SL595 and SL585, and they are the parts we look to carry or source. Elite has been part of Chamberlain since 2003, so its current models are sold as LiftMaster Elite Series. Give us the model when you call and we will confirm parts before we come.
Every gate service in Benbrook
Not a Elite? We repair every major operator brand in Benbrook, plus sliding, swing, commercial and access control work.
- Gate repair in Benbrook
- LiftMaster gate repair in Benbrook
- All-O-Matic gate repair in Benbrook
- US Automatic gate repair in Benbrook
Elite gate repair near Benbrook
Gate Not Working Right Now?
We answer the phone 24/7. If you are stuck, call and we will talk you through the manual release before anyone arrives. See what counts as a gate emergency.