Skip to content
Shield Gate Repair

Annetta North · Parker County

Ghost Controls Gate Repair in Annetta North, TX

Ghost Controls openers on Annetta North gates are battery-based DC units, often self-installed. When one slows or stops partway, battery and charging come first.

  • Licensed & Insured
  • 16+ Years Experience
  • Open 24/7
  • Residential & Commercial

What we see on Ghost Controls gates in Annetta North

Everything a Ghost Controls opener does depends on its battery. On an Annetta North farm gate, that battery is refilled by a solar panel, and when panel output falls below what the gate demands, the opener gets slow, stops partway or responds only sometimes. Pipe gates with long, unsupported spans make it worse, because a sagging leaf costs more energy per cycle. Livestock rubbing on the gate can also shift the arm mounting bracket, and arm gear wear follows.

The repair order is battery, panel, gate, then control box. A battery that has lost capacity is replaced; a panel that is too small, shaded or dirty is upsized, moved or cleaned. On a TSS1 single or a TDS2 dual swing, arm brackets that have moved are re-secured and the auto-close timer and sensors checked. We service self-installed Ghost Controls gates too. We cover gates along FM 5 and Mikus Road and in North Annetta Hills.

On video

Gate repairs near Annetta North on video

Filmed on our own jobs nearby, each marked with its city: Fort Worth (18 mi), Southlake (34 mi), Coppell (40 mi).

What usually fails on Ghost Controls operators

  • Battery capacity loss and charge faults
  • Solar panel output falling below demand
  • Control box and receiver failures
  • Arm gear wear and mounting bracket movement
  • Auto-close timer and sensor faults
  • Remote and keypad pairing loss

Ghost Controls gate repair across Dallas–Fort Worth →

Ghost Controls models we repair in Annetta North

Areas we cover in Annetta North

  • North Annetta Hills
  • FM 5 corridor
  • Annetta Centerpoint Road
  • Mikus Road area

More of our recent gate repair work

Recent gate operator jobs by our technicians across Dallas–Fort Worth.

  • A cedar-panel sliding gate on a steel frame, with its slide operator at the end of the track
  • A black steel sliding gate across a wooded driveway, with the operator beside the post
  • A black steel sliding gate running along a brick house, with its operator and toolkit at the end of the track
  • A technician kneeling at the operator of a tall dark wood-clad sliding gate
  • A sliding gate operator mounted behind a stained wood gate on a concrete driveway
  • A white aluminium sliding gate with its operator control box fixed to the post

Customer testimonials

What our customers say

Customers across Dallas–Fort Worth, filmed at their own gates. We bring the same team to Annetta North.

Ghost Controls gate repair in Annetta North: questions

Our Ghost Controls gate in Annetta North opens partway and stops. Why?

That is the classic sign of a weak battery or a solar panel that cannot keep up. A Ghost Controls opener reads as weak when the battery is low. A sagging pipe gate or a loose arm bracket increases the load. We test the battery and panel output first, then check the gate and the arm mounting.

We installed our own Ghost Controls opener. Will you still work on it in Annetta North?

Yes. Self-installed Ghost Controls gates are common, and we service them like any other. Often the fix is mounting geometry, panel placement or battery size rather than a faulty part. We check the installation, correct what needs correcting, and explain what we changed.

Every gate service in Annetta North

Not a Ghost Controls? We repair every major operator brand in Annetta North, plus sliding, swing, commercial and access control work.

Ghost Controls gate repair near Annetta North

    Gate Not Working Right Now?

    We answer the phone 24/7. If you are stuck, call and we will talk you through the manual release before anyone arrives. See what counts as a gate emergency.

    Call NowText UsEstimate