Skip to content
Shield Gate Repair

Bristol · Ellis County

Ghost Controls Gate Repair in Bristol, TX

Ghost Controls openers in Bristol run on solar and battery at ranch and driveway entrances. A weak battery makes the gate look broken, so we test the charging first.

  • Licensed & Insured
  • 16+ Years Experience
  • Open 24/7
  • Residential & Commercial

What we see on Ghost Controls gates in Bristol

On Bristol’s acreage, a Ghost Controls TSS1 or TDS2 often runs a ranch entrance or driveway gate far from any outlet, so battery health governs everything. A battery cooked by summer heat in its box gives slow travel and partial opening. A panel shaded by a fence line or tree, or coated with dust, cannot keep up. Cattle leaning on a leaf and trailers clipping it bend the arm or shift the mounting bracket, and every cycle afterward draws more power. Low entrances near the Trinity bottoms that hold water after storms put the control box at risk too.

We test the charging system before anything else: battery under load, panel output, and the connections between them. Then we check the arm gear, the mounting bracket and the hinge post. Control box and receiver faults are next. Remote and keypad pairing loss is common after battery problems and is quick to restore. Many Ghost Controls units here were self-installed, and we service those as readily as any other. On a gate off FM 813 or Slate Rock Road, most repairs come down to battery and mounting.

On video

Gate repairs near Bristol on video

Filmed on our own jobs nearby, each marked with its city: Mesquite (21 mi), Dallas (25 mi), University Park (30 mi).

What usually fails on Ghost Controls operators

  • Battery capacity loss and charge faults
  • Solar panel output falling below demand
  • Control box and receiver failures
  • Arm gear wear and mounting bracket movement
  • Auto-close timer and sensor faults
  • Remote and keypad pairing loss

Ghost Controls gate repair across Dallas–Fort Worth →

Ghost Controls models we repair in Bristol

Areas we cover in Bristol

  • River Bottoms
  • Union Hill
  • FM 660 corridor
  • Slate Rock Road
  • Whitehouse Road

More of our recent gate repair work

Recent gate operator jobs by our technicians across Dallas–Fort Worth.

  • A cedar-panel sliding gate on a steel frame, with its slide operator at the end of the track
  • A black steel sliding gate across a wooded driveway, with the operator beside the post
  • A black steel sliding gate running along a brick house, with its operator and toolkit at the end of the track
  • A technician kneeling at the operator of a tall dark wood-clad sliding gate
  • A sliding gate operator mounted behind a stained wood gate on a concrete driveway
  • A white aluminium sliding gate with its operator control box fixed to the post

Customer testimonials

What our customers say

Customers across Dallas–Fort Worth, filmed at their own gates. We bring the same team to Bristol.

Ghost Controls gate repair in Bristol: questions

My Ghost Controls gate in Bristol opens part way and stops. Why?

Most often the battery is weak. A battery that has lost capacity in the heat can start the gate but not finish the cycle. A bent arm or shifted bracket from livestock can also stall it. We test the battery and charging first, then the arm and mounting, and fix whichever is causing the stall.

Can you service a Ghost Controls gate that we installed ourselves?

Yes. Self-installed units are common on Bristol ranch gates. We check the mounting geometry, the arm position, the battery and panel sizing, and the wiring. Often a small change to the bracket or the panel position fixes a problem that has been there since installation.

Every gate service in Bristol

Not a Ghost Controls? We repair every major operator brand in Bristol, plus sliding, swing, commercial and access control work.

    Gate Not Working Right Now?

    We answer the phone 24/7. If you are stuck, call and we will talk you through the manual release before anyone arrives. See what counts as a gate emergency.

    Call NowText UsEstimate