Skip to content
Shield Gate Repair

Kemp · Kaufman County

Ghost Controls Gate Repair in Kemp, TX

Ghost Controls openers at Kemp’s weekend lake homes spend most of their time idle. Batteries, insects and humidity are the usual problems when owners return.

  • Licensed & Insured
  • 16+ Years Experience
  • Open 24/7
  • Residential & Commercial

What we see on Ghost Controls gates in Kemp

A Ghost Controls opener runs entirely on its battery, and at a Kemp weekend house that battery may sit for weeks between uses. Lead-acid batteries that are not cycled can sulfate, and a solar panel shaded by lake trees or covered in pollen may not keep them topped up. When the owner arrives, the gate is slow, stops partway or ignores the remote. Insects nesting in the control box and humidity near the shoreline add corrosion to the list, and remotes with dead cells are common.

We test the battery under load and check the panel, then open the control box to clear insects and check for corrosion. Remotes and keypads are re-paired or replaced if needed. On TSS1 single and TDS2 dual swing openers, we also check arm gears and brackets. We can suggest small steps for weekend owners to keep the gate reliable. We work in Lakeside Acres, Pleasant Oak Beach and Tanglewood Beach.

On video

Gate repairs near Kemp on video

Filmed on our own jobs nearby, each marked with its city: Wills Point (22 mi), Mesquite (31 mi), Dallas (40 mi).

What usually fails on Ghost Controls operators

  • Battery capacity loss and charge faults
  • Solar panel output falling below demand
  • Control box and receiver failures
  • Arm gear wear and mounting bracket movement
  • Auto-close timer and sensor faults
  • Remote and keypad pairing loss

Ghost Controls gate repair across Dallas–Fort Worth →

Ghost Controls models we repair in Kemp

Areas we cover in Kemp

  • Downtown Kemp
  • Edgewater at Cedar Creek Lake
  • Tanglewood Beach
  • Lakeside Acres
  • Pleasant Oak Beach

More of our recent gate repair work

Recent gate operator jobs by our technicians across Dallas–Fort Worth.

  • A cedar-panel sliding gate on a steel frame, with its slide operator at the end of the track
  • A black steel sliding gate across a wooded driveway, with the operator beside the post
  • A black steel sliding gate running along a brick house, with its operator and toolkit at the end of the track
  • A technician kneeling at the operator of a tall dark wood-clad sliding gate
  • A sliding gate operator mounted behind a stained wood gate on a concrete driveway
  • A white aluminium sliding gate with its operator control box fixed to the post

Customer testimonials

What our customers say

Customers across Dallas–Fort Worth, filmed at their own gates. We bring the same team to Kemp.

Ghost Controls gate repair in Kemp: questions

Our Ghost Controls gate at our Kemp weekend house is dead every time we arrive. Why?

The battery is the likely cause. Left idle and undercharged, it loses capacity, especially if the panel is shaded or dirty. We test the battery and panel, replace a worn battery and re-site the panel if needed, so the gate is ready when you arrive.

Wasps built a nest in our Ghost Controls box in Kemp. Is the opener damaged?

Possibly. Insects can cause shorts and corrosion on the control board. We clear the nest, inspect and clean the board and terminals, and test the opener. If the board is damaged, we replace it. Sealing gaps in the box helps prevent a repeat.

Every gate service in Kemp

Not a Ghost Controls? We repair every major operator brand in Kemp, plus sliding, swing, commercial and access control work.

Ghost Controls gate repair near Kemp

    Gate Not Working Right Now?

    We answer the phone 24/7. If you are stuck, call and we will talk you through the manual release before anyone arrives. See what counts as a gate emergency.

    Call NowText UsEstimate