Skip to content
Available 24/7 Emergency Gate Repair Service
Shield Gate Repair

Richardson · Dallas County

Swing Gate Repair in Richardson, TX

Swing gate repair in Richardson for residential swing gates of every age. Most here run on durable operators from the 1990s and 2000s, and the repair is usually limits, boards or receivers.

  • Licensed & Insured
  • 16+ Years Experience
  • Open 24/7
  • Residential & Commercial
Call (214) 735-4314Get a Free Estimate

Swing Gate Repair in Richardson: what we see

Residential swing gates are a large part of the Richardson gate stock, often iron leaves on older streets such as those in Cottonwood Heights. Their operators tend to be long-serving units, and the faults follow a pattern: limit switches that drift so the leaf stops short or overshoots, boards that age out, and receivers that stop recognizing remotes. The arms, hinges and posts have their own wear after decades of use.

We swing each leaf by hand, check hinges and posts, then the operator arm, brackets and pivots, then limits, safety devices, receiver and board. Replacing limit switches or a board brings many older swing operators back to reliable service, and worn arm pivots can be rebuilt. Swing gate repair in Richardson follows that sequence in Breckinridge or along Coit Road.

Real jobs nearby

Our nearest documented jobs to Richardson

Work our technicians have documented, each shown under the city it was in.

All case studies

On video

Gate jobs near Richardson on video

Filmed on our own jobs, each marked with its city: University Park (7 mi), Prosper (20 mi), Southlake (23 mi).

Signs you need swing gate repair

  • Gate sags, or the latch no longer lines upWorn hinges, a post that has moved, or a gate frame that has racked out of square
  • Gate drags on the drivewayA leaning post or hinge wear — the operator is now fighting the ground on every cycle
  • Arm moves but the gate barely doesA bent or worn operator arm, a loose or broken bracket, or a stripped drive
  • One leaf of a double gate lags or will not closeAn arm or board fault on that side, or the two leaves have drifted out of sync
  • Gate will not hold closed, or swings in the windA missing gate stop or latch, or an operator left in manual release
  • Hums at the start of travel and stallsA failing capacitor, or a gate that has become too heavy to start moving

Swing Gate Repair across Dallas–Fort Worth →

Our recent swing gate repair work

Photos from our technicians' recent jobs across Dallas–Fort Worth.

  • Ornate wrought iron double swing gates between stone-clad pillars, both leaves open with an operator at each post
  • A black iron swing gate with scroll detailing and an operator arm, opening onto a driveway beside a brick house
  • A white ornamental iron swing gate with spear finials and a linear operator arm
  • A black iron swing gate with a diagonal-bar pattern, its operator arm and open control box on a brick pillar
  • Double ornamental iron swing gates between stone pillars, with the operator box at the base
  • A black iron swing gate with patriotic bunting on the fence and its arm operator at the hinge

Customer testimonials

What our customers say

Customers across Dallas–Fort Worth, filmed at their own gates. We bring the same team to Richardson.

Watch every customer video

Areas we cover in Richardson

  • Canyon Creek
  • Prairie Creek
  • Breckinridge
  • Heights Park
  • Cottonwood Heights

Swing Gate Repair in Richardson: questions

Why do my Richardson swing gate leaves no longer close in sync?

Usually the limits on one leaf have drifted or the leaf delay setting has changed, and occasionally a hinge or post has moved. We check how each leaf hangs, then reset limits and delay so they close in order and meet properly. On older operators we may replace limit switches that no longer hold their setting.

Can the arm on an older swing gate operator be repaired?

Usually. Arm pivots, bushings and brackets wear and develop play, which makes the gate rattle or stop inconsistently. We replace the worn parts, or the arm if needed, and check the operator itself. If the motor and gearbox are sound, there is no need to replace the whole operator for a worn arm.

More gate services in Richardson

Gate opener brands we repair in Richardson

Gate Not Working Right Now?

We answer the phone 24/7. If you are stuck, call and we will talk you through the manual release before anyone arrives. See what counts as a gate emergency.

(214) 735-4314Request a callback
Call NowText UsEstimate