Skip to content
Shield Gate Repair

Richardson · Dallas County

FAAC Gate Repair in Richardson, TX

FAAC gate repair in Richardson for hydraulic swing operators and slide units that have been in service for many years. Age alone does not condemn a FAAC: seals, fluid and boards are all serviceable.

  • Licensed & Insured
  • 16+ Years Experience
  • Open 24/7
  • Residential & Commercial

What we see on FAAC gates in Richardson

Much of the residential gate equipment in Richardson dates from the 1990s and early 2000s, and a FAAC hydraulic arm of that age is a good example of a unit that is often written off too soon. The mechanical side of these operators was built for a long life. What ages are the seals, the fluid and the board, and the symptoms are slow travel, stopping short, or a gate that will not stay closed against wind.

We test fluid level and seals, the release valve and pump pressure, then the encoder or limits and the 455 D board on hydraulic swing units. A seal kit and a pressure reset return many older FAAC 400 and 402 arms to normal service. Replacement is for a damaged ram or housing, or a board that truly cannot be sourced. That is how we approach FAAC gate repair in Canyon Creek or Prairie Creek.

On video

Gate repairs near Richardson on video

Filmed on our own jobs nearby, each marked with its city: University Park (7 mi), Dallas (13 mi), Mesquite (15 mi).

What usually fails on FAAC operators

  • Hydraulic fluid loss and seal failure
  • Pump pressure drop causing slow or partial travel
  • Control board faults, including the 455 D board on hydraulic swing units
  • Encoder and limit adjustment drift
  • Release-key valve leaks
  • Cold-weather viscosity slowdown

FAAC gate repair across Dallas–Fort Worth →

FAAC models we repair in Richardson

Areas we cover in Richardson

  • Canyon Creek
  • Prairie Creek
  • Breckinridge
  • Heights Park
  • Cottonwood Heights

More of our recent gate repair work

Recent gate operator jobs by our technicians across Dallas–Fort Worth.

  • A cedar-panel sliding gate on a steel frame, with its slide operator at the end of the track
  • A black steel sliding gate across a wooded driveway, with the operator beside the post
  • A black steel sliding gate running along a brick house, with its operator and toolkit at the end of the track
  • A technician kneeling at the operator of a tall dark wood-clad sliding gate
  • A sliding gate operator mounted behind a stained wood gate on a concrete driveway
  • A white aluminium sliding gate with its operator control box fixed to the post

Customer testimonials

What our customers say

Customers across Dallas–Fort Worth, filmed at their own gates. We bring the same team to Richardson.

FAAC gate repair in Richardson: questions

My FAAC in Richardson is over twenty years old. Is it still worth fixing?

Often it is. The hydraulic ram and pump on a FAAC are built to be serviced, and many older units run well after new seals, fluid and a pressure adjustment. The question is the condition of the ram and housing and whether the board is available. We check both and give you a straight answer.

Why does my FAAC gate drift open after closing?

A hydraulic gate that will not hold its closed position usually has an internal seal or release valve that is letting fluid bypass, so pressure bleeds off. It is a repairable fault. We test pressure, inspect the valve and seals, rebuild as needed, and confirm the gate holds closed afterwards.

Gate Not Working Right Now?

We answer the phone 24/7. If you are stuck, call and we will talk you through the manual release before anyone arrives. See what counts as a gate emergency.

Call NowText UsEstimate