Skip to content
Shield Gate Repair

Azle · Tarrant County

All-O-Matic Gate Repair in Azle, TX

All-O-Matic operators are built heavy and simple, which suits wide farm and slide gates around Azle. When one stalls on rocky ground, we check the gate and its footing before the operator.

  • Licensed & Insured
  • 16+ Years Experience
  • Open 24/7
  • Residential & Commercial

What we see on All-O-Matic gates in Azle

Wide farm gates and long driveway slides are a natural fit for an All-O-Matic, and Azle has plenty of both. The Cross Timbers ground underneath changes how they fail. A slide track over uneven rock can bind at one point, and an SL-150 gearbox clutch will slip there every cycle. On a wide swing gate, a hinge post set shallow in a rock pocket may hold for years and then move suddenly, and the SW-300’s torque limiter starts letting go as the leaf drops. Owners see a gate that stalls or reverses and assume the operator is finished.

Usually it is not. Once the gate moves freely by hand, the remaining work is ordinary: limit nuts or cams that have crept, a chain that has stretched and needs replacing before it wears the sprocket, or a relay on the control board. All-O-Matic is still in production, and limit hardware, clutches and chains are commonly carried. On a property off SH 199 or out near Cross Timbers, keeping a sound All-O-Matic running is one of the more economical choices an owner can make.

On video

Gate repairs near Azle on video

Filmed on our own jobs nearby, each marked with its city: Fort Worth (16 mi), Southlake (24 mi), Coppell (31 mi).

What usually fails on All-O-Matic operators

  • Limit nut or cam slip and travel drift
  • Clutch or torque-limiter slip causing stalls (SL-150, SW-300, SW-350)
  • Electronic reversing device sensitivity set wrong for the gate
  • Chain stretch and sprocket wear
  • Control board relay failure

All-O-Matic gate repair across Dallas–Fort Worth →

All-O-Matic models we repair in Azle

Areas we cover in Azle

  • Silver Creek
  • Deer Glade
  • Oak Harbor Estates
  • The Orchard
  • Cross Timbers

More of our All-O-Matic work

Recent All-O-Matic work by our technicians across Dallas–Fort Worth.

  • An All-O-Matic sliding gate operator on a raised steel pad, driving a cedar-panel sliding gate
  • An All-O-Matic slide gate operator against a dark painted board fence, with the drive chain running along the gate
  • An All-O-Matic operator on a steel stand with its drive chain attached to a wooden sliding gate

Customer testimonials

What our customers say

Customers across Dallas–Fort Worth, filmed at their own gates, All-O-Matic owners and Azle customers first. We bring the same team to Azle.

All-O-Matic gate repair in Azle: questions

Our All-O-Matic farm gate in Azle reverses at the same spot every time. Why?

A gate that reverses at one repeatable point is meeting resistance there. In Azle that is often a high spot of rock under a slide track or a sagging leaf scraping the ground on a swing. The reversing device or clutch is doing its job. We find the binding point by hand, correct the track or the post, and then reset the limits and sensitivity so the gate travels cleanly.

Can an All-O-Matic run a wide farm gate with no power at the entrance?

The DC PRO models, such as the SW-375DC PRO for swing gates, are the All-O-Matic options for gates where battery operation matters. Whether one suits a particular wide gate depends on its weight, length and how far power or a charger has to travel. We look at the gate and the site first and give an honest answer, including when a battery-first brand would serve the property better.

Every gate service in Azle

Not a All-O-Matic? We repair every major operator brand in Azle, plus sliding, swing, commercial and access control work.

All-O-Matic gate repair near Azle

    Gate Not Working Right Now?

    We answer the phone 24/7. If you are stuck, call and we will talk you through the manual release before anyone arrives. See what counts as a gate emergency.

    Call NowText UsEstimate