Skip to content
Shield Gate Repair

Kennedale · Tarrant County

All-O-Matic Gate Repair in Kennedale, TX

All-O-Matic slide operators suit Kennedale’s long yard gates because they are rugged and easy to repair. Here is what wears on them when the gate runs across unmade ground.

  • Licensed & Insured
  • 16+ Years Experience
  • Open 24/7
  • Residential & Commercial

What we see on All-O-Matic gates in Kennedale

A Kennedale storage yard asks a lot of a slide gate. The run is long, the gate is often chain link or a heavy cantilever, and the ground under it was never surfaced. An All-O-Matic SL-150 or SL-100 on that gate meets constant drag, and the predictable results follow: chain stretch, rounded sprockets, a clutch that slips when the gate catches on a rut, and a reversing device that trips because the force needed changes from one end of the run to the other.

All of those parts can be serviced. We start by checking the gate itself, because fixing the operator on a gate that drags only buys time. Then the chain and sprockets, replaced as a pair, the clutch adjusted to the real load and the limits reset. A relay failure on the control board is a common electrical fault, and repairable. For a very long, heavy gate along Kennedale Parkway, the SL-175DC PRO is the stronger option in the same range.

On video

Gate repairs near Kennedale on video

Filmed on our own jobs nearby, each marked with its city: Fort Worth (10 mi), Southlake (21 mi), Coppell (25 mi).

What usually fails on All-O-Matic operators

  • Limit nut or cam slip and travel drift
  • Clutch or torque-limiter slip causing stalls (SL-150, SW-300, SW-350)
  • Electronic reversing device sensitivity set wrong for the gate
  • Chain stretch and sprocket wear
  • Control board relay failure

All-O-Matic gate repair across Dallas–Fort Worth →

All-O-Matic models we repair in Kennedale

Areas we cover in Kennedale

  • Steeplechase Estates
  • Shady Creek
  • Oakhill Park
  • Village Creek
  • Brookstone Estates

More of our All-O-Matic work

Recent All-O-Matic work by our technicians across Dallas–Fort Worth.

  • An All-O-Matic sliding gate operator on a raised steel pad, driving a cedar-panel sliding gate
  • An All-O-Matic slide gate operator against a dark painted board fence, with the drive chain running along the gate
  • An All-O-Matic operator on a steel stand with its drive chain attached to a wooden sliding gate

Customer testimonials

What our customers say

Customers across Dallas–Fort Worth, filmed at their own gates, All-O-Matic owners and Kennedale customers first. We bring the same team to Kennedale.

All-O-Matic gate repair in Kennedale: questions

Why does the chain keep jumping on our All-O-Matic yard gate in Kennedale?

A chain that jumps is usually stretched, the sprockets are worn, or the gate is pulling the chain out of line as it drags over uneven ground. On a long yard gate all three are common. We replace chain and sprockets together, check the alignment of the brackets, and look at the gate’s supports so the new chain is not stretched out in the same way.

Can an All-O-Matic secure a Kennedale yard overnight?

An operator holds a closed gate, but the security comes from the whole entrance: a sound gate, a tight chain, working limits and access control that only opens for the right people. We make sure the All-O-Matic closes and stays closed reliably, and check the reversing and safety settings are correct for the gate, since an entrance that reopens unexpectedly is a security problem.

Every gate service in Kennedale

Not a All-O-Matic? We repair every major operator brand in Kennedale, plus sliding, swing, commercial and access control work.

All-O-Matic gate repair near Kennedale

    Gate Not Working Right Now?

    We answer the phone 24/7. If you are stuck, call and we will talk you through the manual release before anyone arrives. See what counts as a gate emergency.

    Call NowText UsEstimate