Parker · Collin County
All-O-Matic Gate Repair in Parker, TX
All-O-Matic operators in Parker drive estate swings and ornamental iron slides on wide frontages. They are built simply, so a fault is usually one part, not the whole unit.
- Licensed & Insured
- 16+ Years Experience
- Open 24/7
- Residential & Commercial
What we see on All-O-Matic gates in Parker
Wide entrances on Parker’s estate lots ask a lot of the gate itself, and clay movement under them is a recurring problem. When the leaf drops or a slide starts to bind, an All-O-Matic does what it was designed to do. The SW-300 and SW-350 swings use a torque limiter or internal clutch that slips; the SL-150 slide has a gearbox clutch. Owners report a gate that stops and reverses. On new installs the same symptom can come from limits and reversing sensitivity set for a lighter gate.
Most All-O-Matic jobs in Parker are adjustments and small parts. Limits reset on the slide’s limit nuts or the swing’s cams, a chain and sprocket replaced, the electronic reversing device set correctly for the gate, a board relay. Parts are readily available. We do not turn up the clutch to push a binding gate. On ornamental slides in Dublin Meadows or estate swings off FM 1378, the gate gets checked by hand before anything is adjusted.
Real jobs nearby
Our nearest documented jobs to Parker
Gate operator work our technicians have documented in nearby cities, each shown under the city it was in.
LiftMasterRichardson, TXresidentialThe Board Had Physically Fallen Inside the Operator
A Sunday call from a senior customer. The circuit board had come loose and failed, and because it had stopped charging them, both backup batteries had gone too.
Read the case study
LiftMasterFrisco, TXresidentialHis Eagle 2000 Was 24 Years Old. We Told Him It Did Not Have to Go.
Gary’s operator was two decades old but the real faults were the wheels and chain. He upgraded anyway — for the battery backup and the warranty, not because we condemned it.
Read the case study
US AutomaticProsper, TXresidentialWe Tested the Bent Arm Before Replacing It
A gate that had not worked in a long time. The battery was flat, and the visibly bent arm was tested on the chance it could be kept.
Read the case study
On video
Gate repairs near Parker on video
Filmed on our own jobs nearby, each marked with its city: Richardson (10 mi), Frisco (13 mi), Prosper (16 mi).
What usually fails on All-O-Matic operators
- Limit nut or cam slip and travel drift
- Clutch or torque-limiter slip causing stalls (SL-150, SW-300, SW-350)
- Electronic reversing device sensitivity set wrong for the gate
- Chain stretch and sprocket wear
- Control board relay failure
All-O-Matic models we repair in Parker
- All-O-Matic SL-100 repair
- All-O-Matic SL-150 repair
- All-O-Matic SW-300 repair
- All-O-Matic SW-350 repair
Areas we cover in Parker
- Southfork Estates
- Hidden Creek Estates
- Chaparral Estates
- Dublin Meadows
- Rolling Ridge
More of our All-O-Matic work
Recent All-O-Matic work by our technicians across Dallas–Fort Worth.
Customer testimonials
What our customers say
Customers across Dallas–Fort Worth, filmed at their own gates, All-O-Matic owners and Parker customers first. We bring the same team to Parker.
All-O-Matic gate repair in Parker: questions
Our new All-O-Matic in Parker reverses for no reason. What is wrong?
On a new gate, the electronic reversing device may be set too sensitive for the actual leaf, or the limits may have been set before the gate settled. It can also be a gate that binds slightly at one point. We check the gate by hand, then set limits and sensitivity correctly, without turning the safety down to mask a mechanical fault.
Is it worth keeping an older All-O-Matic on a Parker estate gate?
Usually, yes. All-O-Matic operators are heavily built and often run twenty years or more. Limits, clutches, chains and boards account for most faults, and the parts are readily available. We judge the unit on gearbox condition and how well it suits the gate, not on its age.
Every gate service in Parker
Not a All-O-Matic? We repair every major operator brand in Parker, plus sliding, swing, commercial and access control work.
- Gate repair in Parker
- LiftMaster gate repair in Parker
- Elite gate repair in Parker
- US Automatic gate repair in Parker
All-O-Matic gate repair near Parker
Gate Not Working Right Now?
We answer the phone 24/7. If you are stuck, call and we will talk you through the manual release before anyone arrives. See what counts as a gate emergency.