Skip to content
Shield Gate Repair

Highland Park · Dallas County

Electric Gate Installation in Highland Park, TX

Electric gate installation in Highland Park, with the power, wiring and controls planned as carefully as the ironwork. Short frontages make the electrical runs short, but old drives and gardens make them tricky.

  • Licensed & Insured
  • 16+ Years Experience
  • Open 24/7
  • Residential & Commercial

Electric Gate Installation in Highland Park: what we see

On a Highland Park property the gate is usually close to the house, so mains power is rarely far away. The difficulty is the route. Older brick and stone drives, mature gardens and narrow side yards all lie between the panel and the gate, and nobody wants a historic drive cut open. Storm surge is a further concern, since a new electric gate puts a board, a receiver and sometimes a loop detector at the end of a buried run.

We plan electric gate installation in Highland Park around the power path: a dedicated circuit, conduit routed under or beside the drive with the least disturbance, the right transformer for the operator, and surge protection on the supply and control leads. A battery backup keeps the gate usable in a power cut. Safety devices are fitted to UL 325 and ASTM F2200. We confirm what the town and your HOA require. We install near Lakeside Park and in Highland Park West.

On video

Gate jobs near Highland Park on video

Filmed on our own jobs, each marked with its city: Dallas (4 mi), Frisco (22 mi).

When it is time for electric gate installation

  • Replacing a gate that keeps failingWorth checking the posts and footings before spending on a new gate
  • Automating an existing manual gateGate weight and hinge condition determine which operator is viable
  • New build or new drivewayBest time to run conduit and set footings properly
  • Upgrading to access controlOperator and access system need to be specified together

Gate Installation across Dallas–Fort Worth →

Our recent electric gate installation work

Photos from our technicians' recent jobs across Dallas–Fort Worth.

  • A pair of black steel swing gates with operator arms, closed across a paver driveway in front of a tile-roofed house
  • Double spear-top steel swing gates with an operator arm on each leaf, between white brick pillars
  • A single arched black steel swing gate with an operator arm, in the drive between two houses
  • A solar-powered swing gate operator on a black steel driveway gate beside a brick house
  • A black steel swing gate with its arm operator fitted beside a brick garage
  • Double iron swing gates standing open on their arm operators between rendered pillars

Customer testimonials

What our customers say

Customers across Dallas–Fort Worth, filmed at their own gates. We bring the same team to Highland Park.

Areas we cover in Highland Park

  • Old Highland Park
  • Lakeside
  • Highland Park West
  • Turtle Creek Acreage
  • Hackberry Creek Acreage

Electric Gate Installation in Highland Park: questions

Do we need an electrician to run power for an electric gate?

The supply circuit from your panel to the gate is electrical work, and we arrange it to code as part of the install. We plan the conduit route, the circuit size and the location of the disconnect with you before anything is dug, and we coordinate the electrical and gate work so it happens in one sequence.

Should a new electric gate in Highland Park have battery backup?

We recommend it. A battery backup lets the gate open and close through a power cut, which matters on a short frontage where a dead gate blocks the drive at the street. It adds a battery to maintain, typically every few years in Texas heat, which is a small cost for the reliability.

Gate Not Working Right Now?

We answer the phone 24/7. If you are stuck, call and we will talk you through the manual release before anyone arrives. See what counts as a gate emergency.

Call NowText UsEstimate