Skip to content
Shield Gate Repair

McKinney · Collin County

FAAC Gate Repair in McKinney, TX

FAAC gate repair in McKinney for hydraulic swing and in-ground operators on estate gates. A FAAC that leaks, slows or stops short usually has a serviceable hydraulic fault, and we carry out that work on site.

  • Licensed & Insured
  • 16+ Years Experience
  • Open 24/7
  • Residential & Commercial

What we see on FAAC gates in McKinney

Estate swing gates are one of the main gate types in McKinney, both on larger lots inside the planned communities and on the older properties toward the rural edge, and a hydraulic FAAC arm such as the 400 or 422 is built for exactly that duty. What wears is the hydraulic side: seals harden through Collin County summers, fluid weeps out, and pump pressure falls until the leaf stops short of the latch. On rural installs, a post that has moved in the clay makes the arm push against a gate that no longer hangs true.

Repair is almost always the right first answer on a FAAC. We pressure test, refit seals, refill and bleed the system, and check the 455 D board and limits before anyone mentions a replacement operator. In-ground 770 units are different: the foundation box can hold water after heavy rain, so we clear the drain and look for ingress. Whether the gate is in Eldorado, Adriatica or on an acreage drive toward the eastern edge of the city, the diagnosis follows the same order.

On video

Gate repairs near McKinney on video

Filmed on our own jobs nearby, each marked with its city: Prosper (11 mi), Frisco (12 mi), Richardson (18 mi).

What usually fails on FAAC operators

  • Hydraulic fluid loss and seal failure
  • Pump pressure drop causing slow or partial travel
  • Control board faults, including the 455 D board on hydraulic swing units
  • Encoder and limit adjustment drift
  • Release-key valve leaks
  • Cold-weather viscosity slowdown

FAAC gate repair across Dallas–Fort Worth →

FAAC models we repair in McKinney

Areas we cover in McKinney

  • Stonebridge Ranch
  • Craig Ranch
  • Adriatica
  • Trinity Falls
  • Eldorado
  • Historic Downtown

More of our recent gate repair work

Recent gate operator jobs by our technicians across Dallas–Fort Worth.

  • A cedar-panel sliding gate on a steel frame, with its slide operator at the end of the track
  • A black steel sliding gate across a wooded driveway, with the operator beside the post
  • A black steel sliding gate running along a brick house, with its operator and toolkit at the end of the track
  • A technician kneeling at the operator of a tall dark wood-clad sliding gate
  • A sliding gate operator mounted behind a stained wood gate on a concrete driveway
  • A white aluminium sliding gate with its operator control box fixed to the post

Customer testimonials

What our customers say

Customers across Dallas–Fort Worth, filmed at their own gates. We bring the same team to McKinney.

FAAC gate repair in McKinney: questions

Do McKinney summers shorten the life of a FAAC hydraulic operator?

Heat is hard on seals and fluid, and a FAAC that sits in full sun all summer will usually show it first as a slow weep at the ram or the release valve. It is a maintenance item rather than a death sentence. We replace the seals, top up with the correct fluid and reset pressure so the gate closes with the right force again.

Another company said my FAAC cannot be fixed. Should I get a second opinion?

It is worth asking. Hydraulic operators fall outside the parts and training many gate technicians carry, so replacement gets quoted when the unit was simply not tested. On a FAAC, seals, fluid, pressure settings and control boards can all be renewed. A damaged housing or ram is the main case where a new operator genuinely makes sense.

Gate Not Working Right Now?

We answer the phone 24/7. If you are stuck, call and we will talk you through the manual release before anyone arrives. See what counts as a gate emergency.

Call NowText UsEstimate