Skip to content
Shield Gate Repair

Plano · Collin County

FAAC Gate Repair in Plano, TX

FAAC gate repair in Plano for the hydraulic swing and in-ground operators found on some of the city's formal estate entrances. Hydraulics need different diagnosis from chain drives, and we work on them.

  • Licensed & Insured
  • 16+ Years Experience
  • Open 24/7
  • Residential & Commercial

What we see on FAAC gates in Plano

FAAC hydraulic operators are less common in Plano than chain and DC units, but where they are fitted, often on paired iron swing gates in the older estate streets, owners are frequently told they cannot be repaired. In most cases they can. A FAAC that moves slowly, stops short or will not hold the gate closed usually needs fluid, a seal kit, a pressure adjustment or a release valve service, all of which we carry out on site.

In-ground FAAC units such as the 770 sit in a box beneath the hinge, and in Plano the risk is water. Heavy spring rain on clay soil drains slowly, and a foundation box that floods will damage the operator in time. When we service an in-ground FAAC we clear the box drain and check for water ingress, as well as the operator itself.

On video

Gate repairs near Plano on video

Filmed on our own jobs nearby, each marked with its city: Richardson (5 mi), Frisco (12 mi), University Park (12 mi).

What usually fails on FAAC operators

  • Hydraulic fluid loss and seal failure
  • Pump pressure drop causing slow or partial travel
  • Control board faults, including the 455 D board on hydraulic swing units
  • Encoder and limit adjustment drift
  • Release-key valve leaks
  • Cold-weather viscosity slowdown

FAAC gate repair across Dallas–Fort Worth →

FAAC models we repair in Plano

Areas we cover in Plano

  • West Plano
  • Willow Bend
  • Legacy West
  • Deerfield
  • Kings Ridge
  • Prestonwood
  • Whiffletree

More of our recent gate repair work

Recent gate operator jobs by our technicians across Dallas–Fort Worth.

  • A cedar-panel sliding gate on a steel frame, with its slide operator at the end of the track
  • A black steel sliding gate across a wooded driveway, with the operator beside the post
  • A black steel sliding gate running along a brick house, with its operator and toolkit at the end of the track
  • A technician kneeling at the operator of a tall dark wood-clad sliding gate
  • A sliding gate operator mounted behind a stained wood gate on a concrete driveway
  • A white aluminium sliding gate with its operator control box fixed to the post

Customer testimonials

What our customers say

Customers across Dallas–Fort Worth, filmed at their own gates. We bring the same team to Plano.

FAAC gate repair in Plano: questions

My FAAC swing gate is leaking oil. Does it need a new operator?

Not usually. An oil leak on a FAAC hydraulic arm generally means worn seals, which is a standard repair. We replace the seals, refill and bleed the system, and set the pressure so the gate closes with the right force.

Why does my FAAC gate run slower in winter?

Hydraulic fluid thickens in cold weather, so a FAAC can slow down on the rare cold Plano mornings. If it stays slow in mild weather, low fluid or a pressure fault is more likely, and we can check both.

Gate Not Working Right Now?

We answer the phone 24/7. If you are stuck, call and we will talk you through the manual release before anyone arrives. See what counts as a gate emergency.

Call NowText UsEstimate