Skip to content
Shield Gate Repair

Leonard · Fannin County

Ghost Controls Gate Repair in Leonard, TX

Ghost Controls openers around Leonard run on solar and battery on farm and driveway gates. Battery health, fire ants and post movement cause most of what we fix.

  • Licensed & Insured
  • 16+ Years Experience
  • Open 24/7
  • Residential & Commercial

What we see on Ghost Controls gates in Leonard

A Ghost Controls TSS1 or TDS2 on a Leonard farm gate depends entirely on its battery and solar panel. Battery capacity falls off with age and summer heat, and the result is slow travel, partial opening or a gate that only responds sometimes. Fire ants move into the warm control box and short the board or receiver. Clay heave and shrink push posts out of line, shifting the arm mounting bracket and making the gate harder to move. Wind and storms across open farmland add strain and surges.

We open the control box first, clear any ants, and check for moisture and damaged contacts. Then we test the battery under load and the panel output. Next we check the arm gear and mounting bracket for wear or movement, and the post. Remote and keypad pairing is restored after any battery or board work. Many Ghost Controls units on farms west of town were self-installed, and we service those as readily as any other, often correcting the mounting geometry while we are there.

On video

Gate repairs near Leonard on video

Filmed on our own jobs nearby, each marked with its city: Prosper (34 mi), Frisco (37 mi), Richardson (41 mi).

What usually fails on Ghost Controls operators

  • Battery capacity loss and charge faults
  • Solar panel output falling below demand
  • Control box and receiver failures
  • Arm gear wear and mounting bracket movement
  • Auto-close timer and sensor faults
  • Remote and keypad pairing loss

Ghost Controls gate repair across Dallas–Fort Worth →

Ghost Controls models we repair in Leonard

Areas we cover in Leonard

  • Downtown Leonard town square
  • SH 78 corridor
  • US 69 corridor
  • Farmland south and west of town

More of our recent gate repair work

Recent gate operator jobs by our technicians across Dallas–Fort Worth.

  • A cedar-panel sliding gate on a steel frame, with its slide operator at the end of the track
  • A black steel sliding gate across a wooded driveway, with the operator beside the post
  • A black steel sliding gate running along a brick house, with its operator and toolkit at the end of the track
  • A technician kneeling at the operator of a tall dark wood-clad sliding gate
  • A sliding gate operator mounted behind a stained wood gate on a concrete driveway
  • A white aluminium sliding gate with its operator control box fixed to the post

Customer testimonials

What our customers say

Customers across Dallas–Fort Worth, filmed at their own gates. We bring the same team to Leonard.

Ghost Controls gate repair in Leonard: questions

Our Ghost Controls gate in Leonard responds only sometimes. Why?

A weak battery or a failing receiver are the usual causes, and fire ants in the control box can short either one. We open the box, check for ants and moisture, test the battery under load, and test the receiver. Re-pairing the remotes after a battery change often restores reliable response.

Can a Ghost Controls arm bracket move with the soil?

Yes. When clay moves the post, the arm’s mounting geometry changes, and the gate becomes harder to move or stops short. The bracket can also loosen. We check the post and bracket, reset or re-anchor them, and adjust the arm so the gate opens fully without straining the operator.

Every gate service in Leonard

Not a Ghost Controls? We repair every major operator brand in Leonard, plus sliding, swing, commercial and access control work.

Ghost Controls gate repair near Leonard

    Gate Not Working Right Now?

    We answer the phone 24/7. If you are stuck, call and we will talk you through the manual release before anyone arrives. See what counts as a gate emergency.

    Call NowText UsEstimate