Skip to content
Shield Gate Repair

Frisco · Collin County

Apollo Gate Repair in Frisco, TX

Apollo gate repair in Frisco for 12-volt swing and slide openers, often solar charged. We check the battery and panel before anything else, because power faults mimic board and motor faults.

  • Licensed & Insured
  • 16+ Years Experience
  • Open 24/7
  • Residential & Commercial

What we see on Apollo gates in Frisco

Battery and solar charging issues are part of the Frisco gate picture, and on an Apollo 1550 or 1650 they are the first thing to rule out. These 12-volt openers run from a battery topped up by a panel or charger, and a weak battery produces the classic Apollo complaint: the gate moves a few feet and stops, or reopens after closing. On a heavier ornamental leaf the extra current draw makes a marginal battery fail sooner.

Our order is battery under load, panel or charger output, connections at the enclosure, then the board and limits. Boards on these openers have changed over the years, from the 833/834 to the 835/836 and the 1050, so we identify yours first. A worn actuator can be replaced with a Nice Apollo TITAN, which distributors describe as bolting onto the older mounting. That applies in Phillips Creek Ranch or on a lot off Legacy Drive.

On video

Gate repairs near Frisco on video

Filmed on our own jobs nearby, each marked with its city: Prosper (6 mi), Richardson (15 mi), Coppell (17 mi).

What usually fails on Apollo operators

  • Battery failure and undercharging
  • Solar panel output loss from shading, soiling or panel age
  • Control board and receiver faults
  • Limit switch drift on swing arms
  • Actuator arm wear and mounting bracket fatigue
  • Corroded low-voltage connections at the enclosure

Apollo gate repair across Dallas–Fort Worth →

Apollo models we repair in Frisco

Areas we cover in Frisco

  • Starwood
  • Newman Village
  • Phillips Creek Ranch
  • Stonebriar
  • Frisco Lakes
  • Panther Creek

More of our recent gate repair work

Recent gate operator jobs by our technicians across Dallas–Fort Worth.

  • A cedar-panel sliding gate on a steel frame, with its slide operator at the end of the track
  • A black steel sliding gate across a wooded driveway, with the operator beside the post
  • A black steel sliding gate running along a brick house, with its operator and toolkit at the end of the track
  • A technician kneeling at the operator of a tall dark wood-clad sliding gate
  • A sliding gate operator mounted behind a stained wood gate on a concrete driveway
  • A white aluminium sliding gate with its operator control box fixed to the post

Customer testimonials

What our customers say

Customers across Dallas–Fort Worth, filmed at their own gates, Apollo owners and Frisco customers first. We bring the same team to Frisco.

Apollo gate repair in Frisco: questions

My Apollo gate in Frisco reopens after it closes. Why?

That is often the battery or a safety input. A sagging battery can make the board read an obstruction near the end of travel and reverse. A photo eye knocked out of line by landscaping crews, or a loop fault, can do the same. We test the battery first, then each safety input, before looking at the board.

Can an old Apollo opener take a new board?

Often, yes, but the right board depends on the opener version. The 1550 and 1650 have used several boards over the years, and they are not all interchangeable. We identify the version and the board on site, then order the matching part or the supported replacement so the opener keeps its existing actuators.

Gate Not Working Right Now?

We answer the phone 24/7. If you are stuck, call and we will talk you through the manual release before anyone arrives. See what counts as a gate emergency.

Call NowText UsEstimate