Skip to content
Available 24/7 Emergency Gate Repair Service
Shield Gate Repair

Grapevine · Tarrant County

Sliding Gate Repair in Grapevine, TX

Sliding gate repair in Grapevine for residential slides at homes and commercial slides on the busy entrances along the highway corridor. Rollers, track and chain come first, then the operator.

  • Licensed & Insured
  • 16+ Years Experience
  • Open 24/7
  • Residential & Commercial
Call (214) 735-4314Get a Free Estimate

Sliding Gate Repair in Grapevine: what we see

Grapevine has both kinds of slide gate. Residential slides sit at homes across the city, and near the lake their rollers, wheels and track hardware rust and stiffen. Commercial slides guard hotel, retail and service entrances along SH 114 and SH 121, where a gate may open and close all day, wearing wheels, guide rollers, chains and sprockets on cycle count. Sliding gate repair in Grapevine means knowing which pattern you are looking at, because a part that should last years on a home gate may be due within months on a busy entrance.

We run the gate by hand along its full travel, check the track and wheels, the guide rollers and stops, then chain tension, sprockets and the operator limits and board. Corroded bearings and rollers are replaced and lubricated, and worn track sections replaced. On commercial slides we also check loops and access control, and can set a replacement interval for wear parts. We repair slides from Original Town to the commercial frontages on William D. Tate Ave.

Real jobs nearby

Our nearest documented jobs to Grapevine

Work our technicians have documented, each shown under the city it was in.

All case studies

On video

Gate jobs near Grapevine on video

Filmed on our own jobs, each marked with its city: Southlake (3 mi), University Park (18 mi), Fort Worth (19 mi).

Signs you need sliding gate repair

  • Gate has come off its track or leans out of lineDebris in the track, a worn V-groove wheel, or a bent or damaged track
  • Grinding, scraping or a heavy rumble as it movesWheel bearings failing, a flat-spotted wheel, or the gate rubbing a guide roller
  • Starts, stops partway and reversesThe gate is binding on the track or a roller, and the operator reads the extra load as an obstruction
  • Chain slack, jumping the sprocket or snappedA stretched or rusted chain, a worn idler, or chain brackets out of line
  • Motor runs but the gate does not moveChain off the sprocket, a broken drive sprocket, or a slipping clutch
  • Gate rolls on its own or will not stay shutTrack slope, a missing or broken gate stop, or a worn latch

Sliding Gate Repair across Dallas–Fort Worth →

Our recent sliding gate repair work

Photos from our technicians' recent jobs across Dallas–Fort Worth.

  • A cedar-panel sliding gate on a steel frame, with its slide operator at the end of the track
  • A black steel sliding gate across a wooded driveway, with the operator beside the post
  • A black steel sliding gate running along a brick house, with its operator and toolkit at the end of the track
  • A technician kneeling at the operator of a tall dark wood-clad sliding gate
  • A sliding gate operator mounted behind a stained wood gate on a concrete driveway
  • A white aluminium sliding gate with its operator control box fixed to the post

Customer testimonials

What our customers say

Customers across Dallas–Fort Worth, filmed at their own gates. We bring the same team to Grapevine.

Watch every customer video

Areas we cover in Grapevine

  • Historic Grapevine Township
  • College Street Historic District
  • Original Town
  • Dove Creek
  • Silver Lake
  • Heritage Oaks

Sliding Gate Repair in Grapevine: questions

Our slide gate near Grapevine Lake has become noisy and slow. Why?

Usually rust in the moving parts. Wheel bearings, guide rollers and chain all corrode in damp air, and each adds friction until the operator struggles. Lubricating a badly corroded bearing does not restore it. We inspect each moving part, replace what has seized or pitted, and lubricate the rest so the gate rolls freely again.

Can a slide gate keep running while waiting for a part?

Sometimes. If the fault is in a sensor or wear part that does not affect safety, the gate can often run with care until the part arrives. If it affects entrapment protection or the gate is dragging badly, it should be left secured or operated manually. We tell you which applies before we leave the site.

More gate services in Grapevine

Gate opener brands we repair in Grapevine

Gate Not Working Right Now?

We answer the phone 24/7. If you are stuck, call and we will talk you through the manual release before anyone arrives. See what counts as a gate emergency.

(214) 735-4314Request a callback
Call NowText UsEstimate