Skip to content
Available 24/7 Emergency Gate Repair Service
Shield Gate Repair

Grapevine · Tarrant County

Swing Gate Repair in Grapevine, TX

Swing gate repair in Grapevine for wrought iron swing gates on older homes, newer streets and lakeside lots. We check hinges, posts and hardware first, then the operator.

  • Licensed & Insured
  • 16+ Years Experience
  • Open 24/7
  • Residential & Commercial
Call (214) 735-4314Get a Free Estimate

Swing Gate Repair in Grapevine: what we see

Wrought iron swing gates lead the residential mix in Grapevine, and the older housing stock means many of them have been hanging for a long time. Hinges wear, bushings flatten and leaves drop at the latch end. Near the lake, rust gets into hinge pins and operator brackets and adds friction through the swing. Older operators on these gates may have boards that are no longer made, so a swing gate repair in Grapevine often involves both the ironwork and a decision about the electronics.

We check the leaf level, post plumb, hinges and brackets, freeing or replacing corroded hardware so the leaf swings easily by hand. Then come the operator arm, its mounting, the limits, force and safety sensors. A worn hinge or bushing is a simple fix, a rusted bracket can be replaced, and an obsolete board may lead to a compatible replacement or a new operator. We repair swing gates in Historic Grapevine Township, Heritage Oaks and around Silver Lake.

Real jobs nearby

Our nearest documented jobs to Grapevine

Work our technicians have documented, each shown under the city it was in.

All case studies

On video

Gate jobs near Grapevine on video

Filmed on our own jobs, each marked with its city: Southlake (3 mi), University Park (18 mi), Fort Worth (19 mi).

Signs you need swing gate repair

  • Gate sags, or the latch no longer lines upWorn hinges, a post that has moved, or a gate frame that has racked out of square
  • Gate drags on the drivewayA leaning post or hinge wear — the operator is now fighting the ground on every cycle
  • Arm moves but the gate barely doesA bent or worn operator arm, a loose or broken bracket, or a stripped drive
  • One leaf of a double gate lags or will not closeAn arm or board fault on that side, or the two leaves have drifted out of sync
  • Gate will not hold closed, or swings in the windA missing gate stop or latch, or an operator left in manual release
  • Hums at the start of travel and stallsA failing capacitor, or a gate that has become too heavy to start moving

Swing Gate Repair across Dallas–Fort Worth →

Our recent swing gate repair work

Photos from our technicians' recent jobs across Dallas–Fort Worth.

  • Ornate wrought iron double swing gates between stone-clad pillars, both leaves open with an operator at each post
  • A black iron swing gate with scroll detailing and an operator arm, opening onto a driveway beside a brick house
  • A white ornamental iron swing gate with spear finials and a linear operator arm
  • A black iron swing gate with a diagonal-bar pattern, its operator arm and open control box on a brick pillar
  • Double ornamental iron swing gates between stone pillars, with the operator box at the base
  • A black iron swing gate with patriotic bunting on the fence and its arm operator at the hinge

Customer testimonials

What our customers say

Customers across Dallas–Fort Worth, filmed at their own gates. We bring the same team to Grapevine.

Watch every customer video

Areas we cover in Grapevine

  • Historic Grapevine Township
  • College Street Historic District
  • Original Town
  • Dove Creek
  • Silver Lake
  • Heritage Oaks

Swing Gate Repair in Grapevine: questions

Our old swing gate in Grapevine has dropped and drags. Can it be saved?

Usually. Most drops come from worn hinges or bushings, or a post that has moved, and both can be corrected without replacing the gate. If the iron itself has rusted through at the bottom rail or a weld has cracked, that needs repair before the hang can be fixed. We assess the leaf and post together and explain what is needed.

How do I know if a swing gate operator is getting too old?

Signs include a discontinued board, parts that are hard to source, repeated failures and heavy wear on the arm or gearbox. Age alone does not settle it, since many operators run for a long time with sensible maintenance. We check parts availability and the condition of the drive and give you a straight comparison of repair and replacement.

More gate services in Grapevine

Gate opener brands we repair in Grapevine

Gate Not Working Right Now?

We answer the phone 24/7. If you are stuck, call and we will talk you through the manual release before anyone arrives. See what counts as a gate emergency.

(214) 735-4314Request a callback
Call NowText UsEstimate