Skip to content
Shield Gate Repair

Plano · Collin County

Sliding Gate Repair in Plano, TX

Sliding gate repair in Plano, on the track, the rollers, the drive chain and the slide operator. Slide gates are the most common automated gate type in West Plano and Willow Bend, and most of their faults start in the hardware rather than the motor.

  • Licensed & Insured
  • 16+ Years Experience
  • Open 24/7
  • Residential & Commercial

Sliding Gate Repair in Plano: what we see

A slide gate in Plano rolls on a ground track that collects grit, leaves and mulch from the beds beside it. Over time the V-groove wheels wear flat, the track gets dented by cars clipping it, and the gate starts to drag. The operator feels that as extra load and either slows down, reverses or trips its overload. Cleaning and straightening the track, and replacing worn wheels, often fixes a gate that the owner assumed needed a new motor.

The drive chain is the next thing we check. Chains stretch, the idler wheels wear, and a slack chain can jump the sprocket and leave the gate stuck halfway. We set the tension, check the chain brackets on the gate are still tight, and look at the guide rollers at the top of the post, since a gate that leans away from them will fight the operator on every cycle.

On video

Gate jobs near Plano on video

Filmed on our own jobs, each marked with its city: Richardson (5 mi), University Park (12 mi), Prosper (17 mi).

Signs you need sliding gate repair

  • Gate has come off its track or leans out of lineDebris in the track, a worn V-groove wheel, or a bent or damaged track
  • Grinding, scraping or a heavy rumble as it movesWheel bearings failing, a flat-spotted wheel, or the gate rubbing a guide roller
  • Starts, stops partway and reversesThe gate is binding on the track or a roller, and the operator reads the extra load as an obstruction
  • Chain slack, jumping the sprocket or snappedA stretched or rusted chain, a worn idler, or chain brackets out of line
  • Motor runs but the gate does not moveChain off the sprocket, a broken drive sprocket, or a slipping clutch
  • Gate rolls on its own or will not stay shutTrack slope, a missing or broken gate stop, or a worn latch

Sliding Gate Repair across Dallas–Fort Worth →

Our recent sliding gate repair work

Photos from our technicians' recent jobs across Dallas–Fort Worth.

  • A cedar-panel sliding gate on a steel frame, with its slide operator at the end of the track
  • A black steel sliding gate across a wooded driveway, with the operator beside the post
  • A black steel sliding gate running along a brick house, with its operator and toolkit at the end of the track
  • A technician kneeling at the operator of a tall dark wood-clad sliding gate
  • A sliding gate operator mounted behind a stained wood gate on a concrete driveway
  • A white aluminium sliding gate with its operator control box fixed to the post

Customer testimonials

What our customers say

Customers across Dallas–Fort Worth, filmed at their own gates. We bring the same team to Plano.

Areas we cover in Plano

  • West Plano
  • Willow Bend
  • Legacy West
  • Deerfield
  • Kings Ridge
  • Prestonwood
  • Whiffletree

Sliding Gate Repair in Plano: questions

My sliding gate makes a grinding noise and moves slowly. What does that mean?

Usually worn track wheels or debris in the track, sometimes a bearing on a guide roller. It is worth fixing before it becomes an operator repair, because the extra effort runs the motor hot and wears the gearbox.

Can a sliding gate be repaired if the track is damaged?

Yes. A dented section of track can usually be straightened or replaced on its own. If the concrete under the track has cracked or heaved, which happens with Plano clay, we will point it out, because a new track on a moving base will not stay straight.

Gate Not Working Right Now?

We answer the phone 24/7. If you are stuck, call and we will talk you through the manual release before anyone arrives. See what counts as a gate emergency.

Call NowText UsEstimate