Denton · Denton County
All-O-Matic Gate Repair in Denton, TX
All-O-Matic gate repair in Denton for the heavy pad-mounted slide and swing operators on estate frontages and community gates. These units are simple to repair, so we repair them.
- Licensed & Insured
- 16+ Years Experience
- Open 24/7
- Residential & Commercial
What we see on All-O-Matic gates in Denton
Denton gates face a mix of conditions that All-O-Matic operators handle well when they are set up properly. Long runs of wiring on larger lots, posts that move with the clay on rural installs, and community slide gates in established neighborhoods such as Country Club and Oakmont all put load on the drive. When a post shifts, the gate binds, and an SW-300 torque limiter or SL-150 clutch starts to slip. That shows up as a gate that stalls or reverses partway, and owners often assume the motor is dying.
The fix is usually mechanical. We square up the gate so it runs freely, reset the clutch or torque limiter, tighten or replace a stretched chain on slide units, and check the limit nut or cam for slip. If the electronic reversing device has been set too sensitive, the gate will keep reversing even after the binding is fixed, so that gets adjusted too. On long Denton runs, we also check the wiring for damage before replacing a control board.
Real jobs nearby
Our nearest documented jobs to Denton
Gate operator work our technicians have documented in nearby cities, each shown under the city it was in.
LiftMasterFrisco, TXresidentialHis Eagle 2000 Was 24 Years Old. We Told Him It Did Not Have to Go.
Gary’s operator was two decades old but the real faults were the wheels and chain. He upgraded anyway — for the battery backup and the warranty, not because we condemned it.
Read the case study
Southlake, TXresidentialThe Control Box Had Been Left Open. Debris and Corrosion Did the Rest.
An open enclosure let debris collect around the electronics and moisture reach the board. The board and the backup batteries were replaced; the opener stayed.
Read the case study
US AutomaticProsper, TXresidentialWe Tested the Bent Arm Before Replacing It
A gate that had not worked in a long time. The battery was flat, and the visibly bent arm was tested on the chance it could be kept.
Read the case study
On video
Gate repairs near Denton on video
Filmed on our own jobs nearby, each marked with its city: Frisco (18 mi), Southlake (19 mi), Prosper (19 mi).
What usually fails on All-O-Matic operators
- Limit nut or cam slip and travel drift
- Clutch or torque-limiter slip causing stalls (SL-150, SW-300, SW-350)
- Electronic reversing device sensitivity set wrong for the gate
- Chain stretch and sprocket wear
- Control board relay failure
All-O-Matic models we repair in Denton
- All-O-Matic SL-100 repair
- All-O-Matic SL-150 repair
- All-O-Matic SW-300 repair
- All-O-Matic SW-350 repair
Areas we cover in Denton
- Rayzor Ranch
- Robson Ranch
- Country Club
- Oakmont
- Southridge
More of our All-O-Matic work
Recent All-O-Matic work by our technicians across Dallas–Fort Worth.
Customer testimonials
What our customers say
Customers across Dallas–Fort Worth, filmed at their own gates, All-O-Matic owners and Denton customers first. We bring the same team to Denton.
All-O-Matic gate repair in Denton: questions
My All-O-Matic slide gate in Denton opens part way, then stops. What is wrong?
The usual suspects are a limit nut that has slipped, a clutch slipping under load, or a gate that has started dragging on its track or rollers. We check the gate moves freely by hand first, then set the clutch and the limits. If a gate binds because a post has moved, adjusting the operator alone will not hold.
Is an All-O-Matic a good fit for a Denton community slide gate?
The SL-150 is a heavy-duty commercial slide operator with a gearbox clutch, which suits a shared gate that cycles all day. The SL-100 is built for residential and light commercial use. For a community gate, the duty rating matters more than the brand, so we check the cycle count and gate weight before recommending either.
Every gate service in Denton
Not a All-O-Matic? We repair every major operator brand in Denton, plus sliding, swing, commercial and access control work.
- Gate repair in Denton
- LiftMaster gate repair in Denton
- Eagle gate repair in Denton
- Viking gate repair in Denton
All-O-Matic gate repair near Denton
Gate Not Working Right Now?
We answer the phone 24/7. If you are stuck, call and we will talk you through the manual release before anyone arrives. See what counts as a gate emergency.