All-O-Matic Gate Repair in Argyle, TX

All-O-Matic operators are heavily built, which suits the wide estate slides and ranch swings that Argyle trailers need to pass through. The AC models need mains at the gate, which on Argyle acreage can mean a long buried line from a meter well away from the entrance, and the 24 VDC versions are an option where power is limited. The trouble usually begins with the gate. A wide leaf dropping on a post in moving ground forces the operator to work harder, and the SW-350 or SL-150 clutch begins to slip, so the gate stalls in the middle of its travel.

Repair here is about putting the load right, then setting the operator to match. We correct the hang, adjust the torque limiter or clutch, check limit nuts or cams for slip, and replace a stretched chain and worn sprockets on slide units. The electronic reversing device often needs resetting too. On drives in Waterstone Estates or off US-377, a buried run to a gate hundreds of feet from the meter is worth testing before any board is replaced.