Farmers Branch · Dallas County
All-O-Matic Gate Repair in Farmers Branch, TX
All-O-Matic operators in Farmers Branch work commercial slides in the Valwood district and residential gates a few streets away. They are simple to repair, which keeps most jobs short.
- Licensed & Insured
- 16+ Years Experience
- Open 24/7
- Residential & Commercial
What we see on All-O-Matic gates in Farmers Branch
Farmers Branch puts All-O-Matic operators on two very different gates within a short drive. On an industrial slide off I-635 or Valley View Lane, an SL-150 runs many cycles a day, so the chain stretches, the sprocket wears and limit nuts creep. On residential swings in Valwood Park or Brookhaven Estates, the trouble is more often the ground. Posts set over old slabs or fill can move, the gate begins to bind, and the operator’s clutch or torque limiter slips. Either way the owner sees a stall and blames the operator.
We check the gate by hand first, every time, because tightening a clutch to force a binding gate hides the fault and damages the gearbox. Then we fix what failed: a chain and sprocket, limits on their lock plate, or a board relay. Parts are easy to get, since All-O-Matic is still in production. For an older SL-150 on a busy yard with a tired gearbox, an SL-175DC PRO is a straight upgrade on the same gate. Most calls never get that far.
Real jobs nearby
Our nearest documented jobs to Farmers Branch
Gate operator work our technicians have documented in nearby cities, each shown under the city it was in.
EagleCoppell, TXresidentialThe Operator Was 26 Years Old. It Is Still Working.
An Eagle 2000 that is no longer manufactured, on a gate with worn wheels and a stretched chain. Replacing the worn parts cost a fraction of replacing the unit.
Read the case study
LiftMasterUniversity Park, TXresidentialA Gate Left Unused for a Year, a Broken Bracket and a Broken Arm
The customer had not operated the gate in about twelve months and wanted it working again. The bracket and the operator arm had both failed.
Read the case study
LiftMasterRichardson, TXresidentialThe Board Had Physically Fallen Inside the Operator
A Sunday call from a senior customer. The circuit board had come loose and failed, and because it had stopped charging them, both backup batteries had gone too.
Read the case study
On video
Gate repairs near Farmers Branch on video
Filmed on our own jobs nearby, each marked with its city: Coppell (7 mi), University Park (8 mi), Richardson (10 mi).
What usually fails on All-O-Matic operators
- Limit nut or cam slip and travel drift
- Clutch or torque-limiter slip causing stalls (SL-150, SW-300, SW-350)
- Electronic reversing device sensitivity set wrong for the gate
- Chain stretch and sprocket wear
- Control board relay failure
All-O-Matic models we repair in Farmers Branch
- All-O-Matic SL-100 repair
- All-O-Matic SL-150 repair
- All-O-Matic SW-300 repair
- All-O-Matic SW-350 repair
Areas we cover in Farmers Branch
- Brookhaven Estates
- Brookhaven Hills
- Mercer Crossing
- Valwood Park
- Town North Estates
More of our All-O-Matic work
Recent All-O-Matic work by our technicians across Dallas–Fort Worth.
Customer testimonials
What our customers say
Customers across Dallas–Fort Worth, filmed at their own gates, All-O-Matic owners and Farmers Branch customers first. We bring the same team to Farmers Branch.
All-O-Matic gate repair in Farmers Branch: questions
Our All-O-Matic yard gate in Farmers Branch stalls with trucks waiting. What is wrong?
Usually the clutch is slipping because the gate has become hard to move, not because the clutch has failed. On a busy yard that can be a worn wheel, a bent track, or a post that has shifted on made ground. We find the binding point by hand, fix it, then reset the clutch and limits. If the yard is now busier than the operator was sized for, we say so.
How often should a commercial All-O-Matic be serviced?
It depends on cycles, not months. A gate in the Valwood district that runs all day wears its chain, sprocket and limit hardware many times faster than a driveway gate. We set an interval based on the actual traffic, check the chain tension and wear each time, and replace parts before they fail during business hours rather than after.
Every gate service in Farmers Branch
Not a All-O-Matic? We repair every major operator brand in Farmers Branch, plus sliding, swing, commercial and access control work.
- Gate repair in Farmers Branch
- LiftMaster gate repair in Farmers Branch
- DoorKing gate repair in Farmers Branch
- Viking gate repair in Farmers Branch
All-O-Matic gate repair near Farmers Branch
Gate Not Working Right Now?
We answer the phone 24/7. If you are stuck, call and we will talk you through the manual release before anyone arrives. See what counts as a gate emergency.