Richland Hills · Tarrant County
All-O-Matic Gate Repair in Richland Hills, TX
All-O-Matic operators are built for heavy gates, which suits the commercial yards in Richland Hills. When one stalls, the cause is usually the yard gate itself, not the operator.
- Licensed & Insured
- 16+ Years Experience
- Open 24/7
- Residential & Commercial
What we see on All-O-Matic gates in Richland Hills
Commercial yards off Loop 820 and Glenview Drive often run heavy slide or cantilever gates, and an All-O-Matic SL-150 is a sensible choice for that weight. The yards themselves create the faults. A gate dragged over gravel or dirt picks up drag every day, rollers fill with grit, and a gate sized for vans now has trucks reversing near it. The SL-150 clutch slips when the gate binds, and owners see a stall. Chains stretch faster under that load, and limit nuts creep after thousands of daily cycles.
We start with the gate. Clean or replace rollers, straighten bent sections, and check the travel by hand. Then we replace the chain and sprocket if needed, reset the limits on the lock plate, and check the board relays. All-O-Matic parts are a short order at most. On a busy yard where the gate stays open during the day, we look at the duty cycle, because an SL-175DC PRO may handle the traffic better than an older unit. Most yards just need the gate put right.
Real jobs nearby
Our nearest documented jobs to Richland Hills
Gate operator work our technicians have documented in nearby cities, each shown under the city it was in.
US AutomaticFort Worth, TXresidentialAnother Company Said Replace It. We Refurbished It Instead.
A Fort Worth homeowner had been told the solar operator needed replacing. The board was corroded, the arm needed repair and the gate was leaning — all fixable.
Read the case study
Southlake, TXresidentialThe Control Box Had Been Left Open. Debris and Corrosion Did the Rest.
An open enclosure let debris collect around the electronics and moisture reach the board. The board and the backup batteries were replaced; the opener stayed.
Read the case study
EagleCoppell, TXresidentialThe Operator Was 26 Years Old. It Is Still Working.
An Eagle 2000 that is no longer manufactured, on a gate with worn wheels and a stretched chain. Replacing the worn parts cost a fraction of replacing the unit.
Read the case study
On video
Gate repairs near Richland Hills on video
Filmed on our own jobs nearby, each marked with its city: Fort Worth (7 mi), Southlake (10 mi), Coppell (16 mi).
What usually fails on All-O-Matic operators
- Limit nut or cam slip and travel drift
- Clutch or torque-limiter slip causing stalls (SL-150, SW-300, SW-350)
- Electronic reversing device sensitivity set wrong for the gate
- Chain stretch and sprocket wear
- Control board relay failure
All-O-Matic models we repair in Richland Hills
- All-O-Matic SL-100 repair
- All-O-Matic SL-150 repair
- All-O-Matic SW-300 repair
- All-O-Matic SW-350 repair
Areas we cover in Richland Hills
- Richland Park
- Richlynn Terrace
- Mimosa Park
- Maple Park
More of our All-O-Matic work
Recent All-O-Matic work by our technicians across Dallas–Fort Worth.
Customer testimonials
What our customers say
Customers across Dallas–Fort Worth, filmed at their own gates, All-O-Matic owners and Richland Hills customers first. We bring the same team to Richland Hills.
All-O-Matic gate repair in Richland Hills: questions
Why does the clutch keep slipping on our All-O-Matic yard gate?
Because the gate is harder to move than it should be. In Richland Hills yards that usually means dirt in the rollers, a wheel dragging on unsurfaced ground, or a leaf bent by a vehicle. The clutch slips to protect the gearbox. We fix the gate and then reset the clutch. Tightening it without fixing the gate just moves the damage into the gearbox.
Can you repair an All-O-Matic damaged in a break-in?
Yes. Forced entry tends to bend the gate, break the arm or bracket, or damage the housing and controls. We secure the gate first so the yard can lock up, then replace the damaged parts and check the board and limits. All-O-Matic parts are readily available, so a full replacement is rarely needed.
Every gate service in Richland Hills
Not a All-O-Matic? We repair every major operator brand in Richland Hills, plus sliding, swing, commercial and access control work.
- Gate repair in Richland Hills
- DoorKing gate repair in Richland Hills
- LiftMaster gate repair in Richland Hills
- Viking gate repair in Richland Hills
All-O-Matic gate repair near Richland Hills
Gate Not Working Right Now?
We answer the phone 24/7. If you are stuck, call and we will talk you through the manual release before anyone arrives. See what counts as a gate emergency.