Hurst · Tarrant County
All-O-Matic Gate Repair in Hurst, TX
All-O-Matic operators are heavy and simple, which suits the commercial service yards in Hurst. When one stalls after a gate strike, it is usually the gate that needs fixing first.
- Licensed & Insured
- 16+ Years Experience
- Open 24/7
- Residential & Commercial
What we see on All-O-Matic gates in Hurst
Retail service yards in Hurst are hard places for a gate. Trucks reverse, leaves get clipped, and waste collection knocks enclosure gates around every week. An All-O-Matic copes with that better than many operators, but its protection reacts to a damaged gate. On an SL-150 slide the clutch slips where a bent leaf binds, and on an SW-350 swing the torque limiter lets go. The gate stalls or reverses at the same point every cycle, and staff assume the operator has failed when it is simply refusing to force a damaged gate through.
We repair from the gate inward. Re-square the frame, replace struck hinges or rollers, and make sure the leaf runs freely by hand. Then we reset the limits and check the chain, which often takes a jolt in an impact and needs replacing or tensioning. Control board relays are the other common failure. All-O-Matic is still in production, so parts are easy, and for yards around North East Mall a repaired operator is almost always cheaper than a new one.
Real jobs nearby
Our nearest documented jobs to Hurst
Gate operator work our technicians have documented in nearby cities, each shown under the city it was in.
Southlake, TXresidentialThe Control Box Had Been Left Open. Debris and Corrosion Did the Rest.
An open enclosure let debris collect around the electronics and moisture reach the board. The board and the backup batteries were replaced; the opener stayed.
Read the case study
US AutomaticFort Worth, TXresidentialAnother Company Said Replace It. We Refurbished It Instead.
A Fort Worth homeowner had been told the solar operator needed replacing. The board was corroded, the arm needed repair and the gate was leaning — all fixable.
Read the case study
EagleCoppell, TXresidentialThe Operator Was 26 Years Old. It Is Still Working.
An Eagle 2000 that is no longer manufactured, on a gate with worn wheels and a stretched chain. Replacing the worn parts cost a fraction of replacing the unit.
Read the case study
On video
Gate repairs near Hurst on video
Filmed on our own jobs nearby, each marked with its city: Southlake (8 mi), Fort Worth (11 mi), Coppell (13 mi).
What usually fails on All-O-Matic operators
- Limit nut or cam slip and travel drift
- Clutch or torque-limiter slip causing stalls (SL-150, SW-300, SW-350)
- Electronic reversing device sensitivity set wrong for the gate
- Chain stretch and sprocket wear
- Control board relay failure
All-O-Matic models we repair in Hurst
- All-O-Matic SL-100 repair
- All-O-Matic SL-150 repair
- All-O-Matic SW-300 repair
- All-O-Matic SW-350 repair
Areas we cover in Hurst
- Hurst Hills
- Bellaire Place
- Billy Creek Estates
- Walker Oaks
- Simpson Park
More of our All-O-Matic work
Recent All-O-Matic work by our technicians across Dallas–Fort Worth.
Customer testimonials
What our customers say
Customers across Dallas–Fort Worth, filmed at their own gates, All-O-Matic owners and Hurst customers first. We bring the same team to Hurst.
All-O-Matic gate repair in Hurst: questions
Why does our Hurst yard gate stop at the same spot since a truck hit it?
Because the gate is now bent or out of line at that point, and the All-O-Matic stops rather than force it. The SL-150 clutch or the electronic reversing device is doing its job. We find where the frame or track is damaged, straighten or replace it, then reset the limits. Turning the force up instead would only wear the gearbox and leave the real damage in place.
Can you service the All-O-Matic on a dumpster enclosure or service gate?
Yes. Enclosure and service gates take regular knocks from collection trucks and deliveries, so hinges, chains and limits wear faster than on any home gate. We repair the damage, service the operator, and look at whether the gate or operator can be repositioned or protected so the weekly collection stops undoing the repair.
Every gate service in Hurst
Not a All-O-Matic? We repair every major operator brand in Hurst, plus sliding, swing, commercial and access control work.
- Gate repair in Hurst
- LiftMaster gate repair in Hurst
- DoorKing gate repair in Hurst
- Viking gate repair in Hurst
All-O-Matic gate repair near Hurst
Gate Not Working Right Now?
We answer the phone 24/7. If you are stuck, call and we will talk you through the manual release before anyone arrives. See what counts as a gate emergency.