Skip to content
Shield Gate Repair

Colleyville · Tarrant County

Automatic Gate Repair in Colleyville, TX

Automatic gate repair in Colleyville covering every generation of operator on these large lots. We check the gate, the safety devices and the electronics in that order, and confirm parts exist before quoting.

  • Licensed & Insured
  • 16+ Years Experience
  • Open 24/7
  • Residential & Commercial

Automatic Gate Repair in Colleyville: what we see

Colleyville chose large lots in the early 1980s and kept building on them for forty years, so automatic gates here range from AC operators fitted decades ago to recent DC units with battery backup. Most are wrought iron or estate swing gates, with some residential slide gates in the mix. The long single leaves that suit a wide frontage are hard on hinges and limits, and clay soil keeps moving the posts they hang from.

Our diagnosis order stays the same: move the gate by hand, check posts and hinges, test photo eyes and edges, then the board, limits and drive. On an older AC operator the capacitor is a frequent culprit and an inexpensive part. Where a unit is old enough that parts may be gone, we check before quoting. Colleyville automatic gate repair along Hall-Johnson Road or in Saddlebrook follows the same steps.

On video

Gate jobs near Colleyville on video

Filmed on our own jobs, each marked with its city: Coppell (10 mi), Dallas (22 mi), Mesquite (33 mi).

Signs you need automatic gate repair

  • Gate will not openPower, board, capacitor, or a jammed track
  • Gate will not closeAlmost always a safety sensor seeing something that is not there
  • Gate opens and immediately reversesPhoto-eye misalignment or an obstruction in the beam path
  • Gate moves slowly or strainsBinding gate, worn rollers, or dropping hydraulic pressure
  • Gate is noisyChain, sprocket, roller or hinge wear — worth fixing before it takes the gearbox with it
  • Gate opens on its ownFaulty receiver, stuck remote button, or a loop detector fault

Automatic Gate Repair across Dallas–Fort Worth →

Our recent automatic gate repair work

Photos from our technicians' recent jobs across Dallas–Fort Worth.

  • A cedar-panel sliding gate on a steel frame, with its slide operator at the end of the track
  • A black steel sliding gate across a wooded driveway, with the operator beside the post
  • A black steel sliding gate running along a brick house, with its operator and toolkit at the end of the track
  • A technician kneeling at the operator of a tall dark wood-clad sliding gate
  • A sliding gate operator mounted behind a stained wood gate on a concrete driveway
  • A white aluminium sliding gate with its operator control box fixed to the post

Customer testimonials

What our customers say

Customers across Dallas–Fort Worth, filmed at their own gates. We bring the same team to Colleyville.

Areas we cover in Colleyville

  • Saddlebrook
  • Highland Meadows
  • Covington
  • Whittier Heights
  • Brook Meadows
  • Woodland Hills

Automatic Gate Repair in Colleyville: questions

Why does my automatic gate in Colleyville stop at a different spot each season?

That is usually limit drift combined with post movement. Clay soil swells in wet months and shrinks in dry ones, so the post shifts slightly and the leaf no longer reaches its set positions the same way. On a long single leaf the effect is magnified. We stabilize the hang where possible and then reset the limits.

Can you tell me whether my old operator is worth fixing before you start?

Yes. We identify the operator, confirm whether the failed part is still available, and give you a repair or replace recommendation before any work begins. On older operators the deciding question is parts, not age alone, and a sound mechanism with a new board can keep running for years.

Gate Not Working Right Now?

We answer the phone 24/7. If you are stuck, call and we will talk you through the manual release before anyone arrives. See what counts as a gate emergency.

Call NowText UsEstimate