Skip to content
Shield Gate Repair

Colleyville · Tarrant County

Eagle Gate Repair in Colleyville, TX

Eagle gate operator repair in Colleyville for the AC slide and swing units on estate driveways and wide residential frontages. When an Eagle fails, it is usually one part with a long life ahead of it once replaced.

  • Licensed & Insured
  • 16+ Years Experience
  • Open 24/7
  • Residential & Commercial

What we see on Eagle gates in Colleyville

Eagle operators are AC units, which puts them squarely in Colleyville’s capacitor problem. On older AC operators, a weak capacitor stops the motor starting, and an Eagle 1000 on a residential slide gate or an Eagle 200 swing operator on an estate drive will hum or click without moving. Limit and cam drift is the other common Colleyville complaint, especially on long leaves where small changes add up. Posts set in clay move over the years, pulling the gate out of line and making the photo-eyes and safety loop more likely to read false obstructions.

We start an Eagle repair by checking the limits and cams, then the chain and sprockets on slide units, the safety loop and photo-eyes, the capacitor and finally the control board. On older Colleyville installs, we confirm the part is available before quoting. An Eagle 2000 commercial slide operator on a large-lot property near Precinct Line Road or SH 26 is usually worth keeping, since replacing the failed part restores a long service life.

On video

Eagle jobs near Colleyville on video

Filmed on our own jobs nearby, each marked with its city: Coppell (10 mi), Mesquite (33 mi).

What usually fails on Eagle operators

  • Control board failure
  • Limit switch and cam drift
  • Chain and sprocket wear
  • Safety loop and photo-eye faults
  • Battery backup failure

Eagle gate repair across Dallas–Fort Worth →

Eagle models we repair in Colleyville

Areas we cover in Colleyville

  • Saddlebrook
  • Highland Meadows
  • Covington
  • Whittier Heights
  • Brook Meadows
  • Woodland Hills

More of our recent gate repair work

Recent gate operator jobs by our technicians across Dallas–Fort Worth.

  • A cedar-panel sliding gate on a steel frame, with its slide operator at the end of the track
  • A black steel sliding gate across a wooded driveway, with the operator beside the post
  • A black steel sliding gate running along a brick house, with its operator and toolkit at the end of the track
  • A technician kneeling at the operator of a tall dark wood-clad sliding gate
  • A sliding gate operator mounted behind a stained wood gate on a concrete driveway
  • A white aluminium sliding gate with its operator control box fixed to the post

Customer testimonials

What our customers say

Customers across Dallas–Fort Worth, filmed at their own gates, Eagle owners and Colleyville customers first. We bring the same team to Colleyville.

Eagle gate repair in Colleyville: questions

Are parts available for an older Eagle operator in Colleyville?

For the Eagle 1000, 2000 and 200, the common parts such as boards, limit switches, chains and sprockets are generally available. Older models like the Eagle 100 or Eagle II need checking. We confirm the specific part before quoting a repair, so you know in advance whether repair or replacement is the realistic choice.

My Eagle swing gate in Colleyville opens slowly and sometimes stops. What is wrong?

On an AC Eagle, a slow or stalling gate often points to a weakening capacitor, a gate binding on its hinges, or a clutch slipping on the Eagle 200 arm. We check the gate swings freely by hand, test the capacitor, and adjust or service the clutch. The motor is rarely the first part to fail.

Gate Not Working Right Now?

We answer the phone 24/7. If you are stuck, call and we will talk you through the manual release before anyone arrives. See what counts as a gate emergency.

Call NowText UsEstimate