Skip to content
Available 24/7 Emergency Gate Repair Service
Shield Gate Repair

Colleyville · Tarrant County

Swing Gate Repair in Colleyville, TX

Swing gate repair in Colleyville for wrought iron and estate swing gates, single and paired. Long leaves on clay-set posts bring their own faults, and we deal with the hang before the operator.

  • Licensed & Insured
  • 16+ Years Experience
  • Open 24/7
  • Residential & Commercial
Call (214) 735-4314Get a Free Estimate

Swing Gate Repair in Colleyville: what we see

Wrought iron and estate swing gates make up much of the gate stock on Colleyville’s large lots. The wide frontages encourage long single leaves, and a long leaf acts as a lever on its top hinge. Over time the hinge wears, the leaf drops at the latch end, and the operator arm has to lift and push it through every cycle. Clay soil that moves the hinge post adds a seasonal twist, so limits that were right in spring are off by late summer.

We check the gate by hand, then the hinges, the post and the frame, then the operator arm, brackets and pivot points, then limits, force settings, photo eyes and the board. Hinge replacement and re-hanging are often the real repair. On older AC swing operators the capacitor is worth testing early. Swing gate repair in Colleyville around Covington or along Hall-Johnson Road begins with that inspection.

Real jobs nearby

Our nearest documented jobs to Colleyville

Work our technicians have documented, each shown under the city it was in.

All case studies

On video

Gate jobs near Colleyville on video

Filmed on our own jobs, each marked with its city: Southlake (4 mi), Fort Worth (14 mi), University Park (21 mi).

Signs you need swing gate repair

  • Gate sags, or the latch no longer lines upWorn hinges, a post that has moved, or a gate frame that has racked out of square
  • Gate drags on the drivewayA leaning post or hinge wear — the operator is now fighting the ground on every cycle
  • Arm moves but the gate barely doesA bent or worn operator arm, a loose or broken bracket, or a stripped drive
  • One leaf of a double gate lags or will not closeAn arm or board fault on that side, or the two leaves have drifted out of sync
  • Gate will not hold closed, or swings in the windA missing gate stop or latch, or an operator left in manual release
  • Hums at the start of travel and stallsA failing capacitor, or a gate that has become too heavy to start moving

Swing Gate Repair across Dallas–Fort Worth →

Our recent swing gate repair work

Photos from our technicians' recent jobs across Dallas–Fort Worth.

  • Ornate wrought iron double swing gates between stone-clad pillars, both leaves open with an operator at each post
  • A black iron swing gate with scroll detailing and an operator arm, opening onto a driveway beside a brick house
  • A white ornamental iron swing gate with spear finials and a linear operator arm
  • A black iron swing gate with a diagonal-bar pattern, its operator arm and open control box on a brick pillar
  • Double ornamental iron swing gates between stone pillars, with the operator box at the base
  • A black iron swing gate with patriotic bunting on the fence and its arm operator at the hinge

Customer testimonials

What our customers say

Customers across Dallas–Fort Worth, filmed at their own gates. We bring the same team to Colleyville.

Watch every customer video

Areas we cover in Colleyville

  • Saddlebrook
  • Highland Meadows
  • Covington
  • Whittier Heights
  • Brook Meadows
  • Woodland Hills

Swing Gate Repair in Colleyville: questions

Why do my paired swing gates in Colleyville no longer meet in the middle?

Usually one leaf has dropped or one post has moved. Clay soil shifts posts slightly through the seasons, and worn hinges let a leaf sag. Either way the leaves arrive at different heights or positions. We correct the hang on each leaf, check the posts, then reset the limits and the leaf delay so they close together.

Is a swing gate operator arm repairable if it is bent?

Often, yes. A bent arm usually comes from the gate being forced, a vehicle contact or a gate that binds. We replace the arm or bracket where needed, then find out why it bent so it does not happen again. If the operator inside is undamaged, there is no reason to replace the whole unit.

More gate services in Colleyville

Gate opener brands we repair in Colleyville

Gate Not Working Right Now?

We answer the phone 24/7. If you are stuck, call and we will talk you through the manual release before anyone arrives. See what counts as a gate emergency.

(214) 735-4314Request a callback
Call NowText UsEstimate