Skip to content
Shield Gate Repair

Keller · Tarrant County

Automatic Gate Repair in Keller, TX

Automatic gate repair across Keller, TX, from private swing and slide gates to the shared entrances of gated villages. We test the operator, its safety devices and the access system before deciding what failed.

  • Licensed & Insured
  • 16+ Years Experience
  • Open 24/7
  • Residential & Commercial

Automatic Gate Repair in Keller: what we see

Keller is newer than the towns around it. The median home dates to 1999 and close to a third were built in the following decade, so most automatic gates here are younger and the motors usually have life left. Calls lean toward access and setup: a keypad that stopped taking codes, a remote no longer learned, a loop crushed when an entrance was resurfaced, or safety sensors and limits that drifted on a newer operator.

Our Keller automatic gate repair follows a set order. Gate by hand first, because clay movement at posts in places like Marshall Ridge can make a good operator stall. Then the safety inputs and photo-eyes, the limits, the receiver and keypad, the loop detector, and last the board and motor. Replacing an operator is a conclusion, not a starting point, and we say plainly when a repair is the better value.

On video

Gate jobs near Keller on video

Filmed on our own jobs, each marked with its city: Coppell (12 mi), Dallas (27 mi), Mesquite (38 mi).

Signs you need automatic gate repair

  • Gate will not openPower, board, capacitor, or a jammed track
  • Gate will not closeAlmost always a safety sensor seeing something that is not there
  • Gate opens and immediately reversesPhoto-eye misalignment or an obstruction in the beam path
  • Gate moves slowly or strainsBinding gate, worn rollers, or dropping hydraulic pressure
  • Gate is noisyChain, sprocket, roller or hinge wear — worth fixing before it takes the gearbox with it
  • Gate opens on its ownFaulty receiver, stuck remote button, or a loop detector fault

Automatic Gate Repair across Dallas–Fort Worth →

Our recent automatic gate repair work

Photos from our technicians' recent jobs across Dallas–Fort Worth.

  • A cedar-panel sliding gate on a steel frame, with its slide operator at the end of the track
  • A black steel sliding gate across a wooded driveway, with the operator beside the post
  • A black steel sliding gate running along a brick house, with its operator and toolkit at the end of the track
  • A technician kneeling at the operator of a tall dark wood-clad sliding gate
  • A sliding gate operator mounted behind a stained wood gate on a concrete driveway
  • A white aluminium sliding gate with its operator control box fixed to the post

Customer testimonials

What our customers say

Customers across Dallas–Fort Worth, filmed at their own gates. We bring the same team to Keller.

Areas we cover in Keller

  • Hidden Lakes
  • Marshall Ridge
  • Bourland Oaks
  • Harmonson Farms
  • Saddlebrook Estates
  • Highland Oaks

Automatic Gate Repair in Keller: questions

Why do newer Keller gates still have problems?

Because most faults on a younger gate are not wear. Limits and photo-eyes shift as a gate settles on its hinges, credentials fall out of a panel after a power cut, and entrance loops get damaged by paving work. None of that means the operator is failing, and most of it is corrected by adjustment or reprogramming.

Can I open my automatic gate if it stops?

Almost every operator has a manual release, a key or lever on the arm or housing that lets you move the gate by hand. Use it with the power off where possible and keep clear of the leaf. We show you where yours is during the visit so a failed gate does not trap a car.

Gate Not Working Right Now?

We answer the phone 24/7. If you are stuck, call and we will talk you through the manual release before anyone arrives. See what counts as a gate emergency.

Call NowText UsEstimate