Skip to content
Shield Gate Repair

Keller · Tarrant County

Apollo Gate Repair in Keller, TX

Apollo gate repair in Keller for 1550 single and 1650 dual swing openers on 12-volt power, with solar or a plug-in charger. We name the board generation and test the battery while the gate runs.

  • Licensed & Insured
  • 16+ Years Experience
  • Open 24/7
  • Residential & Commercial

What we see on Apollo gates in Keller

Apollo, now sold under Nice, makes light 12V linear actuators, so in Keller you find them on residential swing gates, side gates and smaller iron leaves rather than heavy entrances. The design draws little power, which suits solar, but it leaves no margin. A battery worn by Keller summers, a panel shaded by a maturing tree, or a corroded terminal in the steel box will produce the classic Apollo complaint: the gate moves a few feet and stops or reverses.

Before changing a setting we open the box and identify the board: 833/834 on early units, 835/836 on the ETL versions, or the 1050 on the 1K models, since each programs differently. We check the 816 actuator limit wiring with a meter, then the hinges and pivot arm. Where an old actuator is past saving, distributors describe the TITAN 12L as a bolt-in replacement. We cover gates from Old Town Keller out to US-377.

On video

Gate repairs near Keller on video

Filmed on our own jobs nearby, each marked with its city: Southlake (5 mi), Coppell (12 mi), Fort Worth (14 mi).

What usually fails on Apollo operators

  • Battery failure and undercharging
  • Solar panel output loss from shading, soiling or panel age
  • Control board and receiver faults
  • Limit switch drift on swing arms
  • Actuator arm wear and mounting bracket fatigue
  • Corroded low-voltage connections at the enclosure

Apollo gate repair across Dallas–Fort Worth →

Apollo models we repair in Keller

Areas we cover in Keller

  • Hidden Lakes
  • Marshall Ridge
  • Bourland Oaks
  • Harmonson Farms
  • Saddlebrook Estates
  • Highland Oaks

More of our recent gate repair work

Recent gate operator jobs by our technicians across Dallas–Fort Worth.

  • A cedar-panel sliding gate on a steel frame, with its slide operator at the end of the track
  • A black steel sliding gate across a wooded driveway, with the operator beside the post
  • A black steel sliding gate running along a brick house, with its operator and toolkit at the end of the track
  • A technician kneeling at the operator of a tall dark wood-clad sliding gate
  • A sliding gate operator mounted behind a stained wood gate on a concrete driveway
  • A white aluminium sliding gate with its operator control box fixed to the post

Customer testimonials

What our customers say

Customers across Dallas–Fort Worth, filmed at their own gates. We bring the same team to Keller.

Apollo gate repair in Keller: questions

Does Keller clay affect a small Apollo swing gate?

It can. The actuator pushes and pulls the whole leaf from one pivot point, so a hinge post that has leaned with the soil changes the geometry and adds load. The 12V system has little reserve, so it stalls and reverses. We check that the gate swings freely and that the pivot arm still sits level with the gate bracket.

How should an Apollo battery be tested?

Under load, with the gate moving. Apollo wants roughly 12 to 14 volts while the actuator is working, and a worn battery can read healthy at rest and sag as soon as the motor draws current. We measure it during travel, then check the solar panel or charger is actually putting enough back in.

Gate Not Working Right Now?

We answer the phone 24/7. If you are stuck, call and we will talk you through the manual release before anyone arrives. See what counts as a gate emergency.

Call NowText UsEstimate