Skip to content
Shield Gate Repair

University Park · Dallas County

LiftMaster Gate Repair in University Park, TX

A documented LiftMaster LA400 repair in University Park: a swing gate unused for a year, back in service with a new arm on the existing operator.

  • Licensed & Insured
  • 16+ Years Experience
  • Open 24/7
  • Residential & Commercial

What we see on LiftMaster gates in University Park

This University Park owner had not used the swing gate for about twelve months and wanted it working again. Inspection found the bracket and the LA400 operator arm physically damaged. The operator itself was fine, so we replaced the arm and kept everything else.

University Park’s older homes often have heavy wrought-iron swing gates on operators that have been in place for years. When a gate like that stops, the arm, bracket or a battery is far more often the problem than the operator, and that is where we look first.

On video

LiftMaster jobs in University Park on video

Filmed on site in University Park, each linked to its full write-up.

What usually fails on LiftMaster operators

  • Control board failure and error codes
  • Battery and charging faults on DC operators such as the LA400, LA412 and CSW24UL
  • Capacitor failure on AC Elite Series units — motor hums but the gate does not move
  • Limit switch drift causing partial travel
  • Photo-eye and safety loop faults preventing close
  • Battery backup failure on solar and standby units
  • Receiver and remote programming loss

LiftMaster gate repair across Dallas–Fort Worth →

LiftMaster model from this University Park job

Areas we cover in University Park

  • Volk Estates
  • Caruth Hills
  • Windsor Place
  • Stratford Manor
  • University Heights

More of our LiftMaster work

Recent LiftMaster jobs by our technicians, beyond the University Park job above.

  • A LiftMaster solar-powered swing gate operator on a black iron driveway gate, with its control box and solar panel mounted on the gate post
  • A LiftMaster swing gate operator and control box on a black steel gate post under large oak trees
  • A LiftMaster sliding gate operator set into a weathered cedar privacy fence beside a concrete driveway
  • A new LiftMaster swing gate control box on a black steel post beside a cedar fence, with the operator arm laid out ready to fit
  • A LiftMaster sliding gate operator being installed beside a white steel slide gate, with the old housing cover set aside on the grass
  • A LiftMaster slide gate operator during installation in a narrow side yard beside a tall cedar sliding gate

Customer testimonials

What our customers say

Customers across Dallas–Fort Worth, filmed at their own gates, LiftMaster owners and University Park customers first. We bring the same team to University Park.

LiftMaster gate repair in University Park: questions

My LiftMaster swing gate has not been used in months. Will it need a new opener?

Usually not. On this University Park job a year of disuse had left a damaged bracket and arm, and replacing the LA400 arm was enough. Batteries also go flat on an idle gate, so we check them too.

Do you carry LiftMaster LA400 parts?

We fitted a replacement LA400 arm on this job. Tell us your model when you call and we will confirm the part before we come out, so the repair can be done in one visit wherever possible.

Do you work on wrought-iron estate gates in University Park?

Yes. Heavy iron swing gates on LiftMaster and other operators are common here. We repair the operator side and the gate side, including arms, brackets, hinges and posts.

Gate Not Working Right Now?

We answer the phone 24/7. If you are stuck, call and we will talk you through the manual release before anyone arrives. See what counts as a gate emergency.

Call NowText UsEstimate