Skip to content
Available 24/7 Emergency Gate Repair Service
Shield Gate Repair

Hurst · Tarrant County

LiftMaster Gate Repair in Hurst, TX

In Hurst, a LiftMaster gate operator is often guarding the back of a retail building rather than a driveway. Those gates get hit, and we repair both the damage and the operator it strains.

  • Licensed & Insured
  • 16+ Years Experience
  • Open 24/7
  • Residential & Commercial
Call (214) 735-4314Get a Free Estimate

What we see on LiftMaster gates in Hurst

Behind the shopfronts around North East Mall and along Precinct Line Road are service yards and delivery bays, and many run LiftMaster slide or swing operators. Their main enemy is impact. A box truck reversing in a tight yard clips a leaf, bends the frame a few degrees, and from then on the gate binds at the same point in its travel. The LiftMaster feels that resistance and reverses, or its limits stop matching the bent gate. Photo-eyes get knocked out of line, and operators sited in a truck’s turning path take hits of their own.

Repair here starts with the steel. We straighten or re-square the frame, replace hinges that took the blow, and check rollers and track on slide gates. Then we reset the limits and realign the photo-eyes, and read the board for any code left over. On a commercial unit such as the CSW24UL or SL3000UL, boards and sensors are readily available. If the operator sits where trucks swing, moving it out of the swept path along Pipeline Road or Bedford Euless Road is often the repair that stops the next one.

Real jobs nearby

Our nearest documented LiftMaster jobs to Hurst

LiftMaster work our technicians have documented in nearby cities, each shown under the city it was in.

All case studies

On video

LiftMaster jobs near Hurst on video

Filmed on our own jobs nearby, each marked with its city: Dallas (22 mi), University Park (22 mi), Richardson (27 mi).

What usually fails on LiftMaster operators

  • Control board failure and error codes
  • Battery and charging faults on DC operators such as the LA400, LA412 and CSW24UL
  • Capacitor failure on AC Elite Series units — motor hums but the gate does not move
  • Limit switch drift causing partial travel
  • Photo-eye and safety loop faults preventing close
  • Battery backup failure on solar and standby units
  • Receiver and remote programming loss

LiftMaster gate repair across Dallas–Fort Worth →

LiftMaster models we repair in Hurst

Areas we cover in Hurst

  • Hurst Hills
  • Bellaire Place
  • Billy Creek Estates
  • Walker Oaks
  • Simpson Park

More of our LiftMaster work

Recent LiftMaster work by our technicians across Dallas–Fort Worth.

  • A LiftMaster solar-powered swing gate operator on a black iron driveway gate, with its control box and solar panel mounted on the gate post
  • A LiftMaster swing gate operator and control box on a black steel gate post under large oak trees
  • A LiftMaster sliding gate operator set into a weathered cedar privacy fence beside a concrete driveway
  • A new LiftMaster swing gate control box on a black steel post beside a cedar fence, with the operator arm laid out ready to fit
  • A LiftMaster sliding gate operator being installed beside a white steel slide gate, with the old housing cover set aside on the grass
  • A LiftMaster slide gate operator during installation in a narrow side yard beside a tall cedar sliding gate

Customer testimonials

What our customers say

Customers across Dallas–Fort Worth, filmed at their own gates, LiftMaster owners and Hurst customers first. We bring the same team to Hurst.

Watch every customer video

LiftMaster gate repair in Hurst: questions

A delivery truck hit our Hurst service gate. Is the LiftMaster ruined?

Often not. The impact usually bends the gate and damages hinges or rollers, and the operator then struggles against a gate that no longer runs true. We straighten the frame, replace the damaged hardware, then test the LiftMaster, reset its limits and realign the sensors. If the operator itself was struck, we check the mounting, arm and housing before deciding whether parts or a new unit are needed.

Can a LiftMaster be moved so trucks stop hitting it?

Yes, and in a tight Hurst yard that is often worth doing. We look at where vehicles actually turn and reverse, then relocate the operator, its pad and its wiring out of that path, or add protection in front of it. Moving it once is usually cheaper than repairing the same impact damage several times a year.

Every gate service in Hurst

Not a LiftMaster? We repair every major operator brand in Hurst, plus sliding, swing, commercial and access control work.

LiftMaster gate repair near Hurst

Other cities where we have documented LiftMaster jobs.

Gate Not Working Right Now?

We answer the phone 24/7. If you are stuck, call and we will talk you through the manual release before anyone arrives. See what counts as a gate emergency.

(214) 735-4314Request a callback
Call NowText UsEstimate