Skip to content
Shield Gate Repair

Coppell · Dallas County

Automatic Gate Installation in Coppell, TX

Automatic gate installation in Coppell, whether replacing a gate that went in with the house or automating a drive for the first time. Approval, footings, power and safety are planned before anything is ordered.

  • Licensed & Insured
  • 16+ Years Experience
  • Open 24/7
  • Residential & Commercial

Automatic Gate Installation in Coppell: what we see

Much of Coppell’s installation work is replacement. Homes built between 1985 and 2000 have gates and operators reaching the end of their life together, and owners are choosing whether to rebuild or start again. Many sit in subdivisions with an HOA and design rules for fencing, so we confirm what the city and your HOA require before choosing style, height and gate type.

Where old posts have leaned in Coppell clay, we set new ones in deeper footings rather than reuse them. The operator is sized to the gate, with power and any low-voltage run planned and existing conduit reused where sound. Photo-eyes, edges and reversing are fitted to UL 325, and the gate built to ASTM F2200. Homes in The Lakes of Coppell or along Sandy Lake Road get limits set and the manual release explained at handover.

On video

Gate jobs near Coppell on video

Filmed on our own jobs, each marked with its city: Frisco (17 mi), Dallas (18 mi).

When it is time for automatic gate installation

  • Replacing a gate that keeps failingWorth checking the posts and footings before spending on a new gate
  • Automating an existing manual gateGate weight and hinge condition determine which operator is viable
  • New build or new drivewayBest time to run conduit and set footings properly
  • Upgrading to access controlOperator and access system need to be specified together

Gate Installation across Dallas–Fort Worth →

Our recent automatic gate installation work

Photos from our technicians' recent jobs across Dallas–Fort Worth.

  • A pair of black steel swing gates with operator arms, closed across a paver driveway in front of a tile-roofed house
  • Double spear-top steel swing gates with an operator arm on each leaf, between white brick pillars
  • A single arched black steel swing gate with an operator arm, in the drive between two houses
  • A solar-powered swing gate operator on a black steel driveway gate beside a brick house
  • A black steel swing gate with its arm operator fitted beside a brick garage
  • Double iron swing gates standing open on their arm operators between rendered pillars

Customer testimonials

What our customers say

Customers across Dallas–Fort Worth, filmed at their own gates. We bring the same team to Coppell.

Areas we cover in Coppell

  • Old Town Coppell
  • Riverchase
  • The Lakes of Coppell
  • Northlake Woodlands
  • Coppell Greens

Automatic Gate Installation in Coppell: questions

Can I reuse the posts from my old Coppell gate?

Sometimes. If they are plumb, solid at the base and sized for the new gate, they can stay. Posts that have leaned with the clay, cracked their footing or are lighter than the new leaf needs should be replaced, since a new gate on a failing post will sag. We test and measure before deciding.

How long does an automatic gate installation take from start to finish?

Most of the time goes into approval and fabrication rather than the install itself. Once the HOA has approved and the gate is built, setting posts, hanging the gate and fitting the operator is a short job, with concrete given time to cure before the gate is hung. We give you a realistic schedule with the quote.

Gate Not Working Right Now?

We answer the phone 24/7. If you are stuck, call and we will talk you through the manual release before anyone arrives. See what counts as a gate emergency.

Call NowText UsEstimate