Skip to content
Shield Gate Repair

Coppell · Dallas County

Automatic Gate Repair in Coppell, TX

Automatic gate repair across Coppell, TX, for residential slide gates, wrought iron swing gates and community entrances. Most operators here are of a similar age, which makes the likely faults predictable.

  • Licensed & Insured
  • 16+ Years Experience
  • Open 24/7
  • Residential & Commercial

Automatic Gate Repair in Coppell: what we see

Coppell grew from under four thousand residents in 1980 to nearly thirty-six thousand by 2000, and most of its subdivisions were built in that window. Automatic gates went in with them, so a large share are now of one generation. That shows in repeat patterns: control boards from the 1990s giving out, chains and sprockets worn on slide gates, tired limit switches, and keypad faults at entrance gates.

Our Coppell automatic gate repair still runs in order. The gate by hand first, since posts in clay soil move over thirty years. Then photo-eyes and safety inputs, limits, the receiver, keypad and loops, and finally the board and motor. On an operator this age, we also check whether parts are still made before quoting. We cover gates from Old Town Coppell to The Lakes of Coppell, either side of Denton Tap Road.

On video

Gate jobs near Coppell on video

Filmed on our own jobs, each marked with its city: Dallas (18 mi), Mesquite (27 mi).

Signs you need automatic gate repair

  • Gate will not openPower, board, capacitor, or a jammed track
  • Gate will not closeAlmost always a safety sensor seeing something that is not there
  • Gate opens and immediately reversesPhoto-eye misalignment or an obstruction in the beam path
  • Gate moves slowly or strainsBinding gate, worn rollers, or dropping hydraulic pressure
  • Gate is noisyChain, sprocket, roller or hinge wear — worth fixing before it takes the gearbox with it
  • Gate opens on its ownFaulty receiver, stuck remote button, or a loop detector fault

Automatic Gate Repair across Dallas–Fort Worth →

Our recent automatic gate repair work

Photos from our technicians' recent jobs across Dallas–Fort Worth.

  • A cedar-panel sliding gate on a steel frame, with its slide operator at the end of the track
  • A black steel sliding gate across a wooded driveway, with the operator beside the post
  • A black steel sliding gate running along a brick house, with its operator and toolkit at the end of the track
  • A technician kneeling at the operator of a tall dark wood-clad sliding gate
  • A sliding gate operator mounted behind a stained wood gate on a concrete driveway
  • A white aluminium sliding gate with its operator control box fixed to the post

Customer testimonials

What our customers say

Customers across Dallas–Fort Worth, filmed at their own gates. We bring the same team to Coppell.

Areas we cover in Coppell

  • Old Town Coppell
  • Riverchase
  • The Lakes of Coppell
  • Northlake Woodlands
  • Coppell Greens

Automatic Gate Repair in Coppell: questions

Should I replace a 1990s automatic gate operator in Coppell or repair it?

Repair is often still sound, because the mechanical side of a well-installed operator lasts, while the board, chain or limits are what wear. The deciding factors are parts availability, the condition of the gearbox and whether the gate is still square. We check all three and give you both options before any work starts.

What should I check before calling about a stopped gate?

Look at the breaker or switch, the remote battery, and whether anything is blocking the photo-eyes or sitting in the gate path. Note any lights or beeps on the operator. If those are fine, use the manual release only if you know how. Those details help us diagnose faster when we arrive.

Gate Not Working Right Now?

We answer the phone 24/7. If you are stuck, call and we will talk you through the manual release before anyone arrives. See what counts as a gate emergency.

Call NowText UsEstimate