Skip to content
Shield Gate Repair

Coppell · Dallas County

Apollo Gate Repair in Coppell, TX

Apollo gate repair in Coppell for 1550 and 1650 swing openers and the earlier 1500 and 1600. These are 12-volt actuators, so we test the battery while the gate runs and identify the board first.

  • Licensed & Insured
  • 16+ Years Experience
  • Open 24/7
  • Residential & Commercial

What we see on Apollo gates in Coppell

Apollo operators, now part of Nice, are light 12V linear actuators suited to residential swing leaves and side gates. Coppell’s homes date mostly from 1985 to 2000, so an Apollo here may be an early generation on its original board, with a battery and solar panel that have been swapped more than once. The usual complaint is a gate that travels a few feet, then stops or reverses, which on this system starts with power.

We open the steel box and read the board: 833/834 early, 835/836 on the ETL, 1050 on the 1K. Each programs differently. Then the battery under load, the panel or charger, and the 816 actuator limit wiring with a meter. Where an old actuator is worn out, distributors list the TITAN 12L as a bolt-in on the 1500/1600/1550/1650 geometry. We service gates from Riverchase to the streets near Denton Tap Road.

On video

Gate repairs near Coppell on video

Filmed on our own jobs nearby, each marked with its city: Southlake (7 mi), University Park (15 mi), Frisco (17 mi).

What usually fails on Apollo operators

  • Battery failure and undercharging
  • Solar panel output loss from shading, soiling or panel age
  • Control board and receiver faults
  • Limit switch drift on swing arms
  • Actuator arm wear and mounting bracket fatigue
  • Corroded low-voltage connections at the enclosure

Apollo gate repair across Dallas–Fort Worth →

Apollo models we repair in Coppell

Areas we cover in Coppell

  • Old Town Coppell
  • Riverchase
  • The Lakes of Coppell
  • Northlake Woodlands
  • Coppell Greens

More of our recent gate repair work

Recent gate operator jobs by our technicians across Dallas–Fort Worth.

  • A cedar-panel sliding gate on a steel frame, with its slide operator at the end of the track
  • A black steel sliding gate across a wooded driveway, with the operator beside the post
  • A black steel sliding gate running along a brick house, with its operator and toolkit at the end of the track
  • A technician kneeling at the operator of a tall dark wood-clad sliding gate
  • A sliding gate operator mounted behind a stained wood gate on a concrete driveway
  • A white aluminium sliding gate with its operator control box fixed to the post

Customer testimonials

What our customers say

Customers across Dallas–Fort Worth, filmed at their own gates. We bring the same team to Coppell.

Apollo gate repair in Coppell: questions

My Apollo gate in Coppell reopens right after closing. Why?

Usually the board thinks the gate hit something. A weak battery, a limit that is not being read, or a leaf binding near the closed position from a hinge or a post shifted by clay can trigger it. We test the battery under load, check the actuator limit wiring, and move the gate by hand to feel for binding.

Can old Apollo 1500 and 1600 operators still be repaired?

Often. They share mounting geometry with the 1550 and 1650, and many parts and replacement actuators fit. If the board is beyond repair, a later board can sometimes be fitted to the same actuators. We identify exactly what you have before quoting, and if parts are not available we say so first.

Gate Not Working Right Now?

We answer the phone 24/7. If you are stuck, call and we will talk you through the manual release before anyone arrives. See what counts as a gate emergency.

Call NowText UsEstimate