Case studies
Real Repairs, Documented Properly
Not a gallery of finished gates. Each of these walks through what was actually wrong, how we worked it out, and what it took to fix — including several that had already been quoted as full replacements.
Every one filmed or photographed on the job
- Licensed & Insured
- 16+ Years Experience
- Open 24/7
- Residential & Commercial
EagleresidentialThe Opener Was Fine. The Wheels Had Completely Failed.
A three-year-old Eagle operator was working perfectly. The sliding gate wheels underneath it were broken, which is a different repair entirely.
Read the case study
LiftMasterresidentialHis Eagle 2000 Was 24 Years Old. We Told Him It Did Not Have to Go.
Gary’s operator was two decades old but the real faults were the wheels and chain. He upgraded anyway — for the battery backup and the warranty, not because we condemned it.
Read the case study
LiftMasterresidentialA Refurbished Opener Fitted as a Cost Saving. It Was Not Right for the Gate.
A new homeowner called on a Sunday. The previous owner’s contractor had fitted a refurbished unit that was never suited to the gate it was moving.
Read the case study
LiftMasterresidentialTwo Openings, Two Double Swing Systems, One Underground Exit Loop
A Lake Kiowa property needed both its entrance and its exit automated. Each got its own LA400 double swing system, with a buried loop detector for exit.
Read the case study
LiftMasterresidentialA Gate Left Unused for a Year, a Broken Bracket and a Broken Arm
The customer had not operated the gate in about twelve months and wanted it working again. The bracket and the operator arm had both failed.
Read the case study
LiftMasterresidentialThe Chain Was Heavily Rusted. The Operator Was Not the Problem.
A new owner inherited a LiftMaster sliding gate the previous owner had never maintained. We replaced the component that had actually failed.
Read the case study
LiftMasterresidentialChain Replacement on a LiftMaster Sliding Gate
A straightforward Dallas job: the chain on a LiftMaster sliding gate operator had reached the end of its life and was replaced.
Read the case study
LiftMasterresidentialThe Board Had Physically Fallen Inside the Operator
A Sunday call from a senior customer. The circuit board had come loose and failed, and because it had stopped charging them, both backup batteries had gone too.
Read the case study
LiftMasterresidentialThe Fire Department Forced the Gate. Then the Batteries Kept Dying.
An emergency entry broke the operator arm. The batteries needed replacing every two months, and a single solar panel facing one direction was why.
Read the case study
LiftMasterhoaTwo Community Gates, No Parts Replaced, Service Call Only
Both the entrance and exit gates at a gated community kept failing. The operators turned out to be in good condition and needed a reset, not replacement.
Read the case study
RamsetresidentialThe Gearbox Was Repaired, Not Replaced. One Limit Switch Was All It Needed.
A Ramset sliding gate opener in Richardson had a gearbox fault. The gearbox was repaired in place and a single limit switch replaced.
Read the case study
residentialThe Control Box Had Been Left Open. Debris and Corrosion Did the Rest.
An open enclosure let debris collect around the electronics and moisture reach the board. The board and the backup batteries were replaced; the opener stayed.
Read the case study
US AutomaticresidentialAnother Company Said Replace It. We Refurbished It Instead.
A Fort Worth homeowner had been told the solar operator needed replacing. The board was corroded, the arm needed repair and the gate was leaning — all fixable.
Read the case study
US AutomaticresidentialWe Tested the Bent Arm Before Replacing It
A gate that had not worked in a long time. The battery was flat, and the visibly bent arm was tested on the chance it could be kept.
Read the case study
VikingresidentialTwo Companies Quoted Over $6,000 to Replace It. We Refurbished It for $3,100.
A Viking sliding gate opener with a failed motor and a failed board. Both replaceable — which made a full refurbishment cheaper than half a new system.
Read the case study
EagleresidentialThe Operator Was 26 Years Old. It Is Still Working.
An Eagle 2000 that is no longer manufactured, on a gate with worn wheels and a stretched chain. Replacing the worn parts cost a fraction of replacing the unit.
Read the case study
LiftMasterresidentialOff the Track, Unable to Leave, On Site in Twenty Minutes
A heavy sliding gate came off its track early in the morning and trapped the customer. Rocks and debris in the track were the cause.
Read the case study
LiftMasterresidentialAn Ageing GTO Opener Replaced with a LiftMaster LA400
The customer wanted a modern operator with battery backup and a safety sensor on an existing wrought-iron swing gate.
Read the case study
commercialTwo Companies Quoted $25,000 to Replace It. We Repaired It for $6,880.
A delivery truck hit a 35-foot heavy-duty commercial slide gate. Two companies said replace. We replaced the parts that were actually damaged.
Read the case study
RamsetresidentialA Ramset Gate That Stopped in the Wrong Place — It Was the Wheels
Broken rollers had changed where the gate physically sat, so it stopped and opened in the wrong positions. New wheels, and the operator was fine all along.
Read the case study
DoorKingresidentialDoorKing Dual Swing Gearbox Repaired, Not Replaced
A failed gearbox on a DoorKing dual swing operator — repaired and fully serviced, and the customer left with a three-year warranty on the work.
Read the case study
LiftMasterresidentialMoisture-Corroded LiftMaster Board Replaced, Solar System Resized
Corrosion on the control board had killed the operator — and the solar system was never big enough to keep the batteries charged in the first place.
Read the case study
LiftMasterresidentialLiftMaster Gate Kept Going Flat — The Board Had Stopped Charging the Battery
A battery that kept dying on a solar LiftMaster. The battery was fine; the charging circuit on the control board had failed. Replaced, and backed with a 3-year warranty.
Read the case study
LiftMasterresidentialLiftMaster LA400 Was Undersized for the Gate — We Changed the Arm, Not the System
A heavy iron swing gate the existing LA400 arm could not carry. Upgraded to the heavy-duty LA500 arm alone — the control board and control box were fine and stayed exactly where they were.
Read the case study
FAACresidentialFAAC Hydraulic Operator Rebuilt After Two Replacement Quotes
A slow, weak FAAC that two companies had condemned — repaired with a seal kit and a pressure reset.
Read the case study
All-O-MaticresidentialAll-O-Matic Stalling Mid-Travel — The Clutch Was Working Correctly
A gate that kept stopping halfway. The operator was fine; the gate was binding.
Read the case study
LiftMasterresidentialLiftMaster Humming But Not Moving — A Capacitor, Not an Operator
The single most over-replaced fault in the trade, fixed in under an hour.
Read the case study
DoorKinghoaDoorKing Call Box Went Silent Three Months After a Phone Upgrade
The system was undamaged. The analogue line it needed had quietly disappeared.
Read the case study
industrialCommercial Gate Ignoring Trucks — A Broken Loop, Not a Broken Operator
Vehicles queuing at a yard entrance because of a cracked wire in the driveway.
Read the case study
residentialIron Gate Dragging on the Driveway — The Post Had Moved, Not the Gate
Straightening the gate would have hidden the problem for one season.
Read the case study
residentialSolar Gate Failing After a Few Cycles — A Battery, Not a Motor
A long rural driveway where the gate got weaker every week.
Read the case study
residentialGate Stuck Open Overnight at a Residential Property
A security exposure treated as urgent regardless of the underlying fault.
Read the case study
RamsethoaRamset Operator Failing Every Few Months at an Apartment Entrance
Not a defective unit — an operator running far past the duty cycle it was specified for.
Read the case study
residentialNew Automatic Gate Installation — Where the Cost Actually Goes
Footings, conduit and safety devices: the parts nobody sees and everything depends on.
Read the case study
EliteresidentialElite Operator Dead With No Response — Board Confirmed Before Replacing
Tested first, replaced second. The order matters more than people think.
Read the case study
VikingresidentialViking Operator on a Heavy Gate — The Gate Was the Problem
A heavy leaf that had become harder to move was destroying an otherwise healthy operator.
Read the case study
These case studies document work carried out by our own technicians. We serve DFW and the surrounding areas with the same team and the same approach, and new local projects are added here as they are completed.
Gate Not Working Right Now?
We answer the phone 24/7. If you are stuck, call and we will talk you through the manual release before anyone arrives. See what counts as a gate emergency.